Clay-based nanocomposites have been studied or several decades, mainly focusing on clay polymer nanocomposites. Here, we report on a simple wet chemical method to synthesize clay-APTES-Au (CAAu) nanocomposites, where 3-aminopropyltriethoxysilane (APTES) acts as the linkage. The silane terminal of APTES formed bonds with the clay surface, while the other -NH2 terminal bonds to gold nanoparticles. The color of clay changed when these CAAu nanocomposites were formed. By changing the size of the gold nanoparticles, the color of CAAu could be adjusted. simply by changing process parameters. TEM characterization of the synthesized nanocomposites showed an even distribution of gold nanoparticles on the clay surfaces. The nanocomposites were stable in strong acid and high concentration of salt conditions, while strong basic solution like NaOH could slightly influence the status of the gold nanoparticles due to the rupture of the Si-O-Si bonds between APTES and clay. To demonstrate the potential for label free sensing application of CAAu nanocomposites. we made hybrids of clay-APTES-Au-HD-Au (CAAuHAu), where hexamethylene diamine (HD) served as links between CAAu nanocomposites and the gold nanoparticles. The color of the composites changed from red to blue, when the hybrids were formed. Moreover, hemoglobin was loaded on the CAAu nanocomposites, which can potentially be used as a biosensor. These synthesized nanocomposites may combine the catalytic properties of clay and the well-known excellent properties of gold nanoparticles, such as the ability to anchor biological and chemical molecules. Furthermore, the color change of CAAu, when the CAAuHAu hybrids were observed, suggests the applications of these nanocomposites in biochemical and chemical sensing.