In this study, batch and column mode tests were performed to evaluate the efficiency of boron removal from geothermal water containing 10-11mgB/L using Lewatit MK 51 which is a macroporous weak base anion exchange resin with polyhydroxyl groups showing a very high selectivity and capacity for boron. The optimum resin amount for boron removal from geothermal water was determined as 4.0g resin/L-geothermal water. It was found that the sorption kinetics was influenced by particle size of the resin and temperature. The stirring rate had almost no effect on kinetic performance of the resin. According to the results of column-mode study performed, breakthrough and total capacities of the resin were obtained as 2.75 and 4.98mg/mL-resin, respectively.