The effect of alkyl polyglucoside (APG) surfactant on the electrodeposition Co-Ni-Cu alloys nanoparticles has been investigated. In a typical electrodeposition experiment, it was found that as prepared Co-Ni-Cu alloys nanoparticles characteristics, such as size homogeneity, density, dispersion on the electrode substrate and the chemicals composition, depended strongly on the concentration of APG used in the reaction as well as the applied deposition potential. For the case of chemicals composition, low APG concentration (below CMC) was found to be effective for the preparation of excellent composition of the nanoalloys. Meanwhile, for the case of size homogeneity, density, and dispersion on the surface, high APG concentration (above CMC) and high deposition potential were preferred. It was also found that, at concentration above the CMC, the APG surfactant showed a metals ions deposition inhibition characteristic that caused increasing in the electrodeposition overpotential of the entire metals ions, namely cobalt, nickel and copper. As the result the copper was found to place a high percentage in the nanoalloys deposits. Owing to its simple procedure in controlling the composition and the nanoalloys growth characteristic, present approach should find a potential application in preparing Co-Ni-Cu magnetic nanoparticles for used in currently existing applications. (C) 2010 Elsevier B.V. All rights reserved.