A diesel reformer based on microreaction technology was developed for application in an auxiliary power unit (APU) system. The transient characteristics of this reactor for reforming of diesel fuel are reported. Diesel steam reforming was performed at various S/C ratios with load changes ranging from 30 % LL to 80 % LL, i.e., a 1.5 kW to a 4 kW electrical equivalent. The reactor itself was based on an integrated reformer/burner heat exchange reactor concept. The reforming was performed at temperatures above 750 degrees C and at various S/C ratios, down to a minimum of 3.17. Variation of experimental parameters, such as O/C and S/C ratios, are critical for optimum and efficient operation of the reformer.