The adsorption of a large reactive dye, Reactive Black 5, onto four adsorbents has been studied. A commercial active carbon, F400, was selected as a standard and two active carbons prepared from bamboo, a biomaterial. The two bamboo derived carbons, BACX2 and BACX6 had high specific surface areas, namely, 2123 and 1400 m(2)/g, respectively. A fourth widely used adsorbent, bone char, was also tested. The adsorption capacities for F400, bone char, BACX2 and BACX6 were 198, 160, 286 and 473 mg/g, respectively. A series of batch kinetics were carried out to investigate the rate and possible mechanism of Reactive Black 5 adsorption. Two pseudo-kinetic models and one intraparticle diffusion model were tested. The experimental concentration versus time decay curves were best explained by the intraparticle diffusion model. (C) 2009 Elsevier B.V. All rights reserved.