The kinetics of crystallization - nucleation and crystal growth - was determined for a seeded batch cooling process. Several experiments were done utilizing always the same condition: initial concentration, seed mass and size distribution, and cooling rate. From one experiment to other the agitation speed was varied. As the utilized reactor is able to measure torque of the impeller, the power dissipated in agitation was monitored during the crystallization, as well as reactor temperature and turbidity of the suspension. Thrbidity monitoring and the measurement of particle size distribution from seeds and final product allowed obtaining the evolution of the second moment of the particles during the crystallization. The crystallization process was modeled utilizing the Method of Moments and the nucleation and crystal growth kinetics were obtained from least-square minimization of calculated second moments of the crystals. A crystal growth kinetic was determined and the secondary nucleation rate was described as a function of dissipated power and as functions of impeller tip speed. Additional experiments were done, in which cooling rate, seed mass and seed size were varied. The calculated kinetics could satisfactorily describe the results of the additional experiments, corroborating the quality of the modeling. (C) 2009 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.