Due to the inherent inertness of carbon nanotubes (CNTs), one of the most significant challenges in the preparation of CNT-supported catalysts is achieving a uniform deposition of nanoparticles on the surface of the nanotubes. In this paper, we report on the preparation and characterization of Pd nanopartides supported on untreated multi-walled carbon nanotubes (MWCNTs), synthesized in the presence of glutamate. The results of Raman spectroscopy revealed that this synthetic procedure does not have a detrimental effect on the surface structure of MWCNTs. Transmission electron microscopy (TEM) measurements indicated that the dispersion of Pd nanoparticles on untreated-MWCNTs in the presence of glutamate were uniform, and a narrow particle size was observed. X-ray diffraction (XRD) patterns indicated that the Pd/MWCNT catalyst possessed a face-centered cubic crystal structure. Cyclic voltammetry and chronoamperometry tests demonstrated that the obtained Pd/MWCNT catalyst displayed superior electrocatalytic activity and stability in formic acid oxidation, as compared to both a Pd/MWCNT catalyst synthesized without glutamate and a Pd catalyst on acid-oxidized MWCNTs. under otherwise identical experimental conditions. These results indicate that the catalyst developed in this study is a superior candidate for direct formic acid fuel cells (DFAFCs). (C) 2010 Elsevier Ltd. All rights reserved.