Decorative coatings require not only an attractive appearance for market applications, but also an ability to protect the surface underneath. Because of this, corrosion, wear and their combined effects (termed tribocorrosion) are particularly important for lifetime prediction. In this paper, the tribocorrosion behaviour of a range of single layered titanium oxycarbide, TiCxOy, coatings, produced by DC reactive magnetron sputtering, has been studied and reported as a function of electrode potential and applied load. The study was conducted in a reciprocating sliding tribo-system (Flint TE 67/E) in a bio-fluid (an artificial perspiration solution) at room temperature. During the wear tests, both the open-circuit potential and the corrosion current were monitored. The results showed that electrode potential and load have a significant influence on the total material loss. The variations in R-p (polarization resistance) and C-f (capacitance) before and after sliding, obtained by Electrochemical Impedance Spectroscopy (EIS) were evaluated in order to provide an understanding of the resistance of the film in such conditions. Tribocorrosion maps were generated, based on the results, indicating the change in mechanisms of the tribological and corrosion parameters for such coatings, as a function of load and applied potential. (C) 2010 Elsevier Ltd. All rights reserved.