A two stage management of raw biodiesel wastewater was carried out at a laboratory scale and ambient temperature. In the first step, biodiesel was chemically recovered from the wastewater using sulphuric acid as a proton donor with subsequent natural phase separation. Biodiesel was recovered from the raw biodiesel wastewater, in this case at 6-7% (w/w). In the second stage, the aqueous phase discharged from the first stage was supplemented with sodium chloride to 0.061 M and subject to electro-oxiclation using a Ti/RuO2 electrode. The combined treatment completely removed COD and oil and grease, and reduced BOD levels by more than 95%. The rate of removal of all three pollutants fitted a pseudo-first-order rate kinetics with oil and grease removal being approximately 8-16- and 2-7-fold faster than BOD and COD removal, respectively. (C) 2009 Elsevier Ltd. All rights reserved.