Supercritical water oxidation of extracted contaminants is the second step of a two-stage supercritical fluid technology proposed to remediate soils and sediments contaminated with polychlorinated biphenyls (PCBs) and/or polyaromatic hydrocarbons. In connection with the second step, the supercritical water oxidation rate of Aroclor 1248 (A1248), a mixture of similar to 76 PCB congeners, is investigated at 25.3 MPa and temperatures of 723, 748, 773, and 823 K. The reactions are conducted in an isothermal, isobaric plug-flow tubular reactor, and GC/ECD, GC/ FID, GC/TCD, and GC/MS chromatographic methods are employed for product analysis. Experiments are conducted at a nominal A1248 feed concentration of 5.75 x 10(-5) mol/L (reaction conditions) using a methanol solution of 5.245 g/L (5245 ppm) and H2O2 as an initial oxidant (providing similar to 20 mol % excess of O-2). Molar global conversion of A1248 varies from 36.06% (for residence time equal to 6.29 s at 723 K) to 99.95% (54.4 s at 823 K). The overall conversion follows apparent second order, and the rate constant calculated from the data leads to Arrhenius parameters of frequency factor A = 10(17.0+/-0.1) s(-1) (mol/L)(-1) and energy of activation E-a = 186 +/- 2 kJ/mol (44.43 +/- 0.51 kcal/mol). The congener specific analysis indicates a buildup of intermediate congener byproducts, which also undergo oxidation decomposition. The identified reaction products are mainly biphenyl, low-chlorinated PCB congeners such as 2-chlorobiphenyl and 2,2＇-dichlorobiphenyl, CO, and CO2.