This paper deals with phase change in composite materials made of graphite and a phase-change material (PCM). The composites are manufactured by compressing a solid mixture of salt and graphite particles In previous works, the interest of such materials for thermal energy storage at high temperature has been highlighted. They are characterized by quite high energy storage capacity as well as high thermal conductivity. However. first melting/crystallization of these composites could lead to significant salt leakage and shows sonic a priori unexpected features like melting over a range of temperature instead of at constant temperature and significant loss of heat storage capacity. A poro-thermo-elastic analysis is carried Out in this paper for understanding salt melting within the graphite matrices and for proposing reliable ways for composite materials improvement. An intentionally simple think-model, based on mass and energy conservation equations. pressure-dependent liquid-crystal equilibriums, linear elasticity laws and Poiseuille-like flow, is proposed In spite of the simplicity, the model turns out to be apt to explain main macroscopic features of materials melting as observed in calorimetric tests. The influence oil melting dynamics of parameters like the heating rate. the pore-wall rigidity and thickness, the salt volume expansion and the pore connectivity is investigated and several ways for composite materials improvements are discussed. (C) 2009 Elsevier Ltd All rights reserved.