In this study, a systematic investigation on the nonisothermal crystallization kinetics of conversional polypropylene (PP) containing various amounts of ultra-high molecular weight polyethylene (UHMWPE) was reported, and the effects of UHMWPE on crystallization behavior of these PP materials and their foaming properties were also presented. The kinetic studies revealed that the incorporation of UHMWPE into PP led to an increase in the crystallization temperature and temperature range during the crystallization process as well as the relative crystallinity. This behavior was attributed to a comprehensive effect of the nucleation and entanglement of the UHMWPE chains. The kinetic models based on Ozawa's and Mo's methods were used to analyze the nonisothermal crystallization behaviors. It was found that the latter succeeded in describing the nonisothermal crystallization behavior of the PP containing UHMWPE, while the former was not appropriate. The activation energy for the nonisothermal crystallization determined by Kissinger's method also indicated that the crystallization ability of PP was improved with the addition of UHMWPE. Owing to the modification of the crystallization kinetics of the PP materials by introduction of UHMWPE, the foaming properties (i.e., cell uniformity and expandability etc.) were improved significantly. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 119: 1275-1286, 2011