A calcined and hydrothermally annealed material for phosphate removal was prepared in a hollow cylindrical shape from fumed silica generated by a ferroalloy factory, and pulverized oyster shell. Phosphorus removal from wastewater by this material calcined at a range of temperatures (700-900 degrees C) and hydrothermally annealed at temperatures from 130 to 180 degrees C. for 8-16 h, was investigated and the most suitable physicochemical conditions were determined. XRD, SEM, EDS. and XRF techniques were used to characterize the microstructures and compositions of the materials produced, and UV-Vis spectrophotometry using the ammonium phosphomolybdate blue method was used to determine the phosphate concentration in the wastewater. The results indicate that calcium carbonate in oyster shell reacted with SiO2 in fumed silica and formed hydrated calcium silicate after hydrothermal treatment, and the hydrated calcium silicate reacted with phosphate ions in wastewaters to form hydroxyapatite precipitate. The optimal conditions for material production were calcination at 800 degrees C, and hydrothermal annealing at 150 degrees C for 12 h. Materials made under these conditions showed 74% or 92% phosphate removal after 2 or 4 h, respectively. (C) 2010 Elsevier Inc. All rights reserved.