Glycidyl methacrylate/methelenebisacrylimide resin loaded with tetraethelenepentamine ligand was prepared and investigated. The adsorption characteristics of the obtained resin towards Reactive Black 5 (RB5) from aqueous solutions at different experimental conditions were established by means of batch and column methods. The mechanism of interaction between RB5 and resin's active sites was discussed. The resin showed high affinity for the adsorption of RB5 where an uptake value of 0.63 mmol/g was reported for the obtained resin, at 25 degrees C. The kinetics and thermodynamic behavior of the adsorption reaction were also defined. These data indicated an endothermic spontaneous adsorption process and kinetically followed the pseudo-second order model. Breakthrough curves for the removal of RB5 were studied at different flow rates and bed heights. The critical bed height for the studied resin column was found to be 0.764cm at flow rate of 8 mL/min. The adsorbed dye was eluted from the investigated resin effectively. Regeneration and durability of the loaded resin towards the successive resin were also clarified. (C) 2011 Elsevier B.V. All rights reserved.