Journal of Materials Science, Vol.46, No.8, 2557-2567, 2011
Phase stabilities in molten Li/K carbonate of efficient matrix materials for molten carbonate fuel cells: thermodynamic calculations and experimental investigations
In this study, we investigated the thermodynamics and experimental performance of Al, Zr, and Ce species under anode and cathode gas conditions in Li/K carbonate at 650 A degrees C. Among the Al, Zr, and Ce species investigated, we found that lithium aluminate (LiAlO2), lithium zirconate (Li2ZrO3), and cerium/ceria oxide (CeO2) were the most stable materials. Experimentally, we performed immersion tests in molten (Li-0.62/K-0.38)(2)CO3 at 650 A degrees C to evaluate the phase and microstructure stabilities of these materials. The gamma-LiAlO2 phase transformation, determined using X-ray diffractometry, was dependent on the immersion time. We performed similar measurements for alpha-LiAlO2, Li2ZrO3, and CeO2 materials in molten Li/K carbonate at 650 A degrees C. From immersion tests, the presence of the alpha-LiAlO2 phase revealed that phase transformation of gamma-LiAlO2 occurs in Li/K carbonate melts under cathode gas atmospheres; in contrast, no phase transformation was evident after immersion of the pure alpha-LiAlO2 phase in molten carbonate for 5,000 h. Furthermore, we found that Li2ZrO3 and CeO2 were stable phases after immersion in molten carbonate at 650 A degrees C, under both anode and cathode gas atmospheres, for more than 5,000 h.