화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Chemical Engineering Research, Vol.49, No.3, 277-284, June, 2011
Export Citation
알루미나 졸과 아크릴레이트 단량체를 이용한 UV경화형 유-무기 하이브리드 하드코팅 막 제조
Preparation of UV-Curable Organic-Inorganic Hybrid Hard Coating Films Using Alumina Sols and Acrylate Monomers
황지현, 송기창†
  • 건양대학교 화공생명학과, 320-711 충남 논산시 내동 26
Ji Hyeon Hwang, and Ki Chang Song†
  • Department of Chemical and Biochemical Engineering, Konyang University, 26 Nae-dong, Nonsan, Chungnam 320-711, Korea
E-mail:
초록
본 연구에서는 알루미나 졸과 아크릴레이트 단량체를 이용하여 UV 경화형 유-무기 하이브리드 하드코팅 용액을 제조하였다. Aluminum isopropoxide로부터 얻어진 알루미나 졸에 실란커플링제인 methacryloxypropyl trimethoxysilane(MPTMS)을 첨가하여 제조된 졸을 무기물 성분으로 사용하였다. 유기물 성분으로는 다양한 아크릴레이트 단량체인 pentaerythritol triacrylate(PETA), 1,6-hexanediol diacrylate(HDDA), dipentaerythritol hexaacrylate (DPEHA)를 혼합하여 사용하였다. 이후 무기물 성분과 유기물 성분을 혼합하여 유-무기 하이브리드 코팅 용액을 제조한 후, 이를 polycarbonate 기판 위에 스핀 코팅 후 UV 경화를 실시하여 도막을 형성하였다. 이때 무기물 성분 중의 MPTMS의 첨가량과 UV 경화 시간 변화가 코팅 막의 물성에 미치는 영향을 연구하였다. 그 결과 MPTMS가 0.20 mole 첨가 될 경우 코팅 막은 3H의 우수한 연필경도를 나타내었으며 haze값이 2%로 내마모성도 우수하였다.
In this study, UV-curing type organic - inorganic hybrid hard coating solutions were prepared from alumina sols and acrylate monomers. The mixture of alumina sols, prepared from aluminum isopropoxide, and a silane coupling agent, methacryloxypropyl trimethoxysilane(MPTMS), was used as an inorganic component. Also, the mixture of acrylate monomers, pentaerythritol triacrylate(PETA), 1,6-hexanediol diacrylate(HDDA) and dipentaerythritol hexaacrylate (DPEHA), was used as an organic component. The organic-inorganic hybrid coating solutions were obtained by mixing the inorganic component and organic component, deposited on polycarbonate substrates by spin coating and densified by UV-curing. The effect of the amount of MPTMS in the inorganic component and the irradiation time during UV-curing was studied on the properties of coating films. As a result, when 0.20 mole of MPTMS was used, the pencil hardness of coated films showed an excellent pencil hardness of 3H and also exhibited a good abrasion resistance of 2% in haze.
Keywords:Methacryloxypropyl Trimethoxysilane;Alumina Sols;UV-curing;Organic-inorganic Hybrid;Acrylate Monomers;Hard Coatings
  1. Wouters MEL, Wolfs DP, van der Linde MC, Hovens JHP, Tinnemans AHA, Prog. Org. Coat., “Transparent UV Curable Antistatic Hybrid Coatings on Polycarbonate Prepared by the Sol-Gel Method", 51, 312 (2004)
  2. Yu YY, Chen WC, Mater. Chem. Phys., “Transparent Organic-Inorganic Hybrid Thin Films Prepared from Acrylic Polymer and Aqueous Monodispersed Colloidal Silica", 82(2), 388 (2003)
  3. Kang DP, Park HY, Ahn MS, Myung IH, Lee TJ, Choi JH, Kim HJ, Polym.(Korea), 29(3), 242 (2005)
  4. Oh SK, Chung JS, Lee BS, Song KC, Korean Chem. Eng. Res., “Preparation of Hard Coating Solutions by Sol-Gel Reaction of Glycidoxypropyl Trimethoxysilane and Methacryloxypropyl Trimethoxysilane", 46(2), 274 (2008)
  5. Bae BS, Polymer Science and Technology., “Inorganic-Organic Hybrid Materials Coating”, 12(5), 716 (2001)
  6. Hong JH, UV Curing Coating, Chosun University Press, KwangJu (2002)
  7. Kim DH, Song KC, Chung JS, Lee BS, Korean Chem. Eng. Res., “Preparation of Hard Coating Solutions using Colloidal Silica and Glycidoxypropyl Trimethoxysilane by the Sol-Gel Method", 45(5), 442 (2007)
  8. Cheong IY, Cho KI, Cheong SH, Park HN, Song KC, Korean Chem. Eng. Res., “Preparation of Hard Coating Solutions with High Refractive Index for Polycarbonate Sheet by the Sol-Gel Method", 45(4), 335 (2007)
  9. Nam DW, Nam BU, Cha BJ, Kim BJ, Polym.(Korea), 31(2), 111 (2007)
  10. ASTM D 3359, “Standard Test Methods for Measuring Adhesion by Tape Test,” ASTM International, 927-929 (1997)
  11. Yoo JW, Kim DS, Polym.(Korea), 23(3), 376 (1999)
  12. Rabek JF, Mechanisms of Photophysical Processes and Photochemical Reactions in Polymers, John Wiley & Sons, New York, NY (1987)