Adsorption of derivative of phenylanthranilic acid - flufenamic acid (FFA) on the "oxide-free" and oxidized surface of mild steel in neutral borate buffer solution was studied by ellipsometry and XPS. Anodic polarization curves reveal that complete suppression of the anodic dissolution of iron is achieved at FFA concentration C-in = 3.8 mM. Besides, adding FFA substantially shifts the pitting potential from 0.06 V to 0.67 V. Ellipsometric studies have shown that at the applied potential -0.65 V, when the surface is free from the oxide layer, FFA forms monomolecular layer. To characterize the surface layers formed after exposing the sample in 5 mM FFA solution the XPS was used to assess the composition and the thickness of the layers. Using the intensities of the Fe 2p, Fe 3p, N 1s, F 1s, O 1s and C 1s and analyzing the angle resolved XPS data the FFA molecules have been shown to form monomolecular layer in which FFA is (vertically or slightly inclined) anchored by iron cations through oxygen atoms of carboxyl group to the surface and the fluorine atoms of CF3 groups form the utmost layer. Similar orientation is also assumed for FFA molecules adsorbed on the oxidized iron surface. It seems that the layer formed by FFA or similar molecules may serve a robust interface for grafting other substances on such a functionalized surface. (C) 2010 Elsevier B. V. All rights reserved.