In this study, 15 nm-thick sputter-deposited TiVCr alloy thin films were developed as diffusion barrier layers for Cu interconnects. The TiVCr alloy film tends to form a solid solution and a simple crystal structure from the constituted elements. Under TEM, the 15 nm-thick as-deposited TiVCr alloy film was observed to have a dense semi-amorphous or nanocrystalline structure. In conjunction with X-ray diffraction, transmission electron microscopy, and energy-dispersive spectroscopy analyses, the Si/TiVCr/Cu film stack remained stable at a high temperature of 700 degrees C for 30 min. The electrical resistance of Si/TiVCr/Cu film stack remained as low as the as-deposited value. These indicated that the mixed TiVCr refractory elements' alloy barrier layer is very beneficial to prevent Cu diffusion. (C) 2011 Elsevier B.V. All rights reserved.