Electrochimica Acta, Vol.56, No.7, 2815-2822, 2011
Electrosynthesis and characterization of an electrochromic material from poly(1,4-bis(2-thienyl)-benzene) and its application in electrochromic devices
1,4-Bis(2-thienyl)-benzene monomer is successfully synthesized via coupling reaction. Poly(1,4-bis(2-thienyl)-benzene)(PBTB) is electrochemically synthesized and characterized. Resulting polymer film has distinct electrochromic properties. Its application in electrochromic devices (ECDs) is discussed. PBTB is switched between yellow in the neutral state and green in the oxidized state. Electrochromic switching of PBTB film is performed and the polymer film shows a maximum optical contrast (Delta T %) of 44.8% at 610 nm in visible region with a response time of 1.6 s. The coloration efficiency (CE) of PBTB is calculated to be 162 cm(2) C-1. Electrochromic device (ECD) based on PBTB and poly(3,4-ethylenedioxythiophene) (PEDOT) is also constructed and characterized. Maximum contrast (Delta T %) and switching time of the device are measured as 29.5% and 0.43 s at 628 nm. The CE of the device is calculated to be 408.9 cm(2) C-1. Clear change from green (at neutral state) to blue color (at full oxidized state) of this ECD is demonstrated with reasonable cycle life. (C) 2010 Elsevier Ltd. All rights reserved.
Keywords:Conjugated polymer;Spectroelectrochemistry;Electrochromic device;Electrochemical polymerization;Poly(1,4-bis(2-thienyl)-benzene)