Solid-state radical grafting of glycidyl methacrylate (GMA) onto poly(4-methyl-1-pentene) (PMP) was performed using supercritical carbon dioxide (scCO(2)) impregnation technology. The polymer films were firstly impregnated in the scCO(2) phase with the GMA using benzoyl peroxide as thermal initiator. The grafting degree and surface morphology of the samples may be controlled by the following factors: time, temperature, and pressure of impregnation. A 2(3) factorial design to evaluate the main and interaction effects of such factors on the grafting of the PMP by GMA (grafting response) was elaborated from FTIR data. The superior and inferior limits of the levels were defined on basis of a P-x-y diagram for binary system CO(2) + GMA that provided the location of the transition curves of such a system. Better grafting response was obtained for pressure of 130 bar, temperature of 70 degrees C and time of 7 h. The PMP-g-GMA films exhibited a thermal profile similar to that of the unmodified polymer. Adhesion characteristics of polymer films are dependent on grafting degree of GMA. (C) 2011 Elsevier Inc. All rights reserved.