Low cost pliable electronics portend the advancement of novel inexpensive microfluidic electrochemical devices. In the direct printing approach, the manner of deposition of conductive material from a liquid suspension to ensure electrical continuity is crucial. We describe here an approach in which V-groove networks that make up the path of circuitry are first scribed on non-porous inexpensive surfaces. Liquid drops of carbon nanotube ink are then placed on the surface adjacent to the V-grooves to enable wicking to produce the electrical circuit. This method essentially bypasses the need for inkjet printing. We investigate the basic efficacy of the conductive networks developed using this approach and demonstrate its use in generating electrically driven liquid flow of particles in a simple open capillary channel. (C) 2011 Elsevier Inc. All rights reserved.