Submicrometer-sized pH-responsive sterically stabilized polystyrene (PS) latex particles were synthesized by dispersion polymerization in isopropyl alcohol with a poly[2-(diethylamino)ethyl methacrylate]- (PDEA-) based macro-initiator. These PDEA-PS latexes were extensively characterized with respect to their particle size distribution, morphology, chemical composition, and pH-responsive behavior. Millimeter- and centimeter-sized "liquid marbles" with aqueous volumes varying between 15 mu L and 2.0 mL were readily prepared by rolling water droplets on the dried PDEA-PS latex powder. The larger liquid marbles adopted nonspherical shapes due to gravitational forces; analysis of this deformation enabled the surface tension to be estimated. Scanning electron microscopy and fluorescence microscopy studies indicated that flocs of the PDEA-PS particles were adsorbed at the surface of these water droplets, leading to stable liquid marbles. The relative mechanical integrity of the liquid marbles prepared from alkaline aqueous solution (pH 10) was higher than those prepared from acidic aqueous solution (pH 2) as judged by droplet roller experiments. These liquid marbles exhibited long-term stability (over 1 h) when transferred onto the surface of liquid water, provided that the solution pH of the subphase was above pH 8. In contrast, the use of acidic solutions led to immediate disintegration of these liquid marbles within 10 min, with dispersal of the PDEA-PS latex particles in the aqueous solution. Thus the critical minimum solution pH required for long-term liquid marble stability correlates closely with the known pK(a) value of 7.3 for the PDEA stabilizer chains. Stable liquid marbles were also successfully prepared from aqueous Gellan gum solution and glycerol.