For studied blends of amorphous glycol-modified poly(ethylene terephthalate) (PETG) and semi-crystalline polyethylene naphthalate (PEN), melt miscibility is understood from the linear variation of a single glass transition temperature (T-g) over the entire composition range. The diluent effect of PETG component severely retarded the crystallization of PEN component within blends. Nevertheless, after being through isothermal stretching at 120 degrees C, crystallization was able to progress efficiently during heating in a continuous manner. Instead of being thermally relaxed back to amorphous state, parallel sliding motions of stretched PEN segments toward crystallization appear rather dominant. Within stretched blends, the PETG content emerged as a critical factor to the crystallinity increase of PEN fraction and the absence of lattice defect, instead of behaving as a diluent component. Furthermore, as being indicated by in-situ small-angle X-ray experiments, regular lamellar stacking gradually developed within stretched blends through heating, which indicates the involvement of thermally activated self-association of randomly distributed crystalline lamellae. With including a higher fraction of PETG component, these secondary ordering processes including lamellar thickening can be activated at lower temperature. Hence, the accompanied thermal relaxation of flexible PETG segment is inferred able to lubricate the sliding of stretched PEN segments in amorphous regions via lowering encountered frictional hindrance, and thus enhance both primary and secondary ordering processes within stretched blends. (C) 2012 Elsevier Ltd. All rights reserved.