Tetrapod-shaped ZnO particles are generated via gas-phase reaction of Zn vapor and oxygen in air, where they undergo homogeneous nucleation from supersaturated ZnO vapor and successive growth by surface reaction. It was found that a simple device for flow restrictor is effective in making ZnO particles of terapod-shape by leaving sufficient amounts of unreacted Zn vapor with the embryos of ZnO. In the absence of the flow restrictor, only spherical particles are formed because the oxidation reaction takes place immediately after mixing and unreacted Zn vapor does not remain for the subsequent crystal growth. The Zn vapor concentration distribution, oxygen concentration distribution, temperature, gas velocity and reaction rate in the reactor were analyzed by using a conventional computational fluid dynamic simulation package. The simulation revealed that the flow restrictor does not enhance mixing between Zn vapor and air but suppresses the mixing and reduces the residence time in the reactor so that sufficient amounts of unreacted Zn vapor remain downstream of the flow restrictor, allowing ZnO particles to grow in tetrapod-shape by abnormal crystal growth. (C) 2011 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.