CrN films with strong adhesion with the substrate have been fabricated on Ti6Al4V alloy using novel plasma immersion ion implantation and deposition (PIII&D) based on high power pulsed magnetron sputtering (HPPMS). A macro-particle free chromium plasma is generated by HPPMS while the samples are subjected to high voltage pulses to conduct PIII&D. The CrN coatings have a dense columnar structure and low surface roughness. The grains in the films have the face-center cubic (fcc) structure with the (2 0 0) preferred orientation. An excellent adhesion is achieved with a critical load up to 74.7 N. An implantation voltage of 18 kV yields a hardness of 18 GPa and better wear resistance and a low friction coefficient of 0.48 are achieved. (C) 2011 Elsevier B.V. All rights reserved.