Zinc oxide (ZnO) thin film was fabricated by sol-gel spin coating method on glass substrate. X-ray reflectivity (XRR) and its optimization have been used for characterization and extracting physical parameters of the film. Genetic algorithm (GA) has been applied for this optimization process. The model independent information was needed to establish data analyzing process for X-ray reflectivity before optimization process. Independent information was exploited from Fourier transform of Fresnel reflectivity normalized X-ray reflectivity. This Fourier transformation (Auto Correlation Function) yields thickness of each coated layer on substrate. This information is a keynote for constructing optimization process. Specular X-ray reflectivity optimization yields structural parameters such as thickness, roughness of surface and interface and electron density profile of the film. Acceptable agreement exists between results obtained from Fourier transformation and X-ray reflectivity fitting. (C) 2011 Elsevier B.V. All rights reserved.