Minimization of secondary nucleation by attrition in industrial crystallizers is a major challenge. In this work, a novel airlift crystallizer has been designed, constructed, and experimentally tested aiming at the reduction of attrition by using air for mixing instead of a stirrer or a circulation pump. It is experimentally demonstrated that in this crystallizer ideal growth, i.e., growth of crystals without any nucleation, can be approached up to a seeding load of 0.5% and crystal size of up to 600 mu m. Attrition is considerably decreased in an airlift crystallizer compared to conventional impeller-mixed crystallizers. This air-mixed crystallizer enables the production of crystals of high quality and offers a large flexibility of the final crystal size by manipulating the air flow rate and the sparger design. Comparison of different designs showed a large effect of a gas disengagement zone on the performance of the crystallizer, especially when large crystals were desired. The disengagement zone allows high circulation velocities and thus good mixing without entrainment of the gas bubbles in the downcomer, approaching a uniform suspension of the crystals.