A sewage sludge sample was pyrolyzed in a drop tube furnace at 500 degrees C and sweeping gas flow rate of 300 cm(3)/min. Triacetonamine (TAA) was detected with GC/MS as major component in the resulting bio-oil using acetone as the absorption solvent and proven to be a product from the reaction of NH(3) in the bio-oil with the absorption solvent acetone. TAA yield increased with storage time and reached a level about 28.4% (% sludge fed, daf) after 175 h. Since the reaction of pure NH(3) with acetone does not proceed, some species in the bio-oil must catalyze the reaction of NH(3) with acetone. TAA was isolated in a high yield (27.9%, daf) and high purity (80.4%) by column chromatography with different solvents, including mixed solvents, as eluants. The study revealed the possibility of sewage sludge as potential resource of TAA. (C) 2010 Elsevier Ltd. All rights reserved.