Disposal of operationally exhausted metalworking fluids (MWFs) is enormously challenging. In this study the feasibility of employing a sequential Fenton-biological oxidation for the treatment of recalcitrant components of MWF wastewater was investigated. A statistical experimental design was employed to address Fenton reagent (H(2)O(2), Fe(2+)) dose optimisation which ensured minimal concentrations of the reagents, thus making the treatment environmentally less toxic to subsequent biological steps and economically viable. This was achieved by employing a five-level-two-variable central composite experimental design. The results demonstrated that Fenton pre-treatment of the MWF effluent greatly improved biodegradability index (BOD(5)/COD increased from 0.160 to 0.538) with a synchronous lowering in the toxicity of the wastewater, making the recalcitrant component more amenable to subsequent biological treatment. An overall decrease of 92% and 86% in chemical oxygen demand (COD) and total organic carbon (TOC), respectively, was achieved by the two-step treatment method developed. (C) 2011 Elsevier Ltd. All rights reserved.