| 학회 |
한국재료학회 |
| 학술대회 |
2017년 가을 (11/15 ~ 11/17, 경주 현대호텔) |
| 권호 |
23권 2호 |
| 발표분야 |
D. 구조 재료 분과 |
| 제목 |
Study on nickel electroless plating of alumina particles |
| 초록 |
In this study, Ni-coated Al2O3 composites were synthesized using an elctroless plating method. The morphology and microstructure of electroless Ni coating was examined by varying major processing parameters, such as etching process, plating solution concentration, plating times and reduction time. Etching of the Al2O3 platelets appears to be a key factor to form a umiform Ni layer coating on the Al2O3 platelets. The tickness of the resultant uiform Ni coating layer was increases from 20 nm th 100nm with increasing concentration in electroless Ni plating solution from 8.2 g/L to 32.8 g/L. Followed by increasing concentration, content of Ni (from 2.6 wt.% to 21.7 wt.%) and P (from 0.1 wt.% to 2.5 wt.%) increases. In the case of increasing plating time, content of Ni (from 19.2 wt.% to 7.2 wt.%) and P (from 1.7 wt.% to 0.8 wt.%) decreases. The best result with more a uniform Ni coating was achieved with a double plating process and a 6 h reduction time. Spark plasma sintering was applied to successfully produce Ni-coated Al2O3 composites. |
| 저자 |
이수경1, AMY WAT2, 박혜지3, 송영석1, 강진수1, 성영은4, ROBERT O. RITCHIE4, 최희만2
|
| 소속 |
1국민대, 2Univ. of California, 3Berkeley, 4서울대 |
| 키워드 |
Electroless Ni plating; alumina platelet; nickel; spark plasma sintering
|
| E-Mail |
|
