| 학회 |
한국재료학회 |
| 학술대회 |
2004년 봄 (05/14 ~ 05/14, 강릉대학교) |
| 권호 |
10권 1호 |
| 발표분야 |
세라믹스 |
| 제목 |
The study of hydroxyapatite coating on Titanium (ECAP) and Titanium alloys using a sol-gel derived precursor |
| 초록 |
A comparative study of the hydroxyapatite coating using a sol-gel derived precursor on ECAP-Ti and different grades of titanium alloys (Ti-0.2%Fe, Ti-0.5Fe%, Ti-2%Fe, GR-1, GR-4) is been done. The precursors are made by mixing Ca(NO3)2 .4H2O and (C2H5O)3PO in 2-methoxy Ethanol. The samples are dip coated in the prepared sol-gel. Later, they are dried at 200 C and calcined rapidly at 400 C for 2 min. This process is repeated till a 4-layer coating is obtained. These layers of coating are compensated by calcining rapidly at 600 C for 2 min. The present study is to find a suitable implant that can be coated with hydroxyapatite having good bonding strength using sol-gel process. ECAP-Ti has been a promising implant material in this regard. ECAP-Ti having good mechanical strength compare to Cp-Ti is expected to show good bonding strength of hydroxyapatite coating over the substrate. |
| 저자 |
Avinash Balakrishnan1, Y..J. Kim2, T.N. Kim1, J.W. Shin2, J.K Park1, S.H Lee2
|
| 소속 |
1Department of Materials Engineering, 2Graduate school of Paichai Univ. |
| 키워드 |
ECAP-Ti; sol-gel; hydroxyapatite
|
| E-Mail |
|
