| 학회 |
한국화학공학회 |
| 학술대회 |
2005년 가을 (10/21 ~ 10/22, 인하대학교) |
| 권호 |
11권 2호, p.2641 |
| 발표분야 |
촉매 및 반응공학 |
| 제목 |
The Performance of Cu/Ni alloy based on perovskite catalyst anode in SOFC type reactor |
| 초록 |
The traditional materials used in SOFCs(Solid Oxide Fuel Cell) are strontium-doped lanthanum manganite (LSM) as the cathode, yttria-stabilized zirconia (YSZ) as the electrolyte and a Ni cermet as the anode in dry reforming. But the dry reforming should be operated at high temperature because the dry reforming is an intensive endothermic reaction (Δ Ho298 = 247 kJ/mol). Under such severe condition, nickel based catalyst was deactivated by exposure to concentrated methane which cause carbon deposition on the catalyst surface. Therefore, many researches have been focused on the development of catalyst, which has high activity and high resistance to carbon deposition for long term operation. In this work, we examined perovskite oxide anode, Cu-Ni alloy doped perovskite catalyst anode, similar to conventional Ni based anodes. Cu doped perovskite catalyst anode showed poor catalytic activity and low power generation performance. But, Cu-Ni alloy doped perovskite catalyst anode showed higher catalytic activity and power generation performance. |
| 저자 |
장성혁1, 홍석인1, 문동주2, 김준호1, 김광호1
|
| 소속 |
1고려대, 2한국과학기술(연) |
| 키워드 |
SOFC; Perovskite; Cu/Ni alloy
|
| E-Mail |
|
| 원문파일 |
초록 보기 |
