| 학회 |
한국화학공학회 |
| 학술대회 |
2021년 가을 (10/27 ~ 10/29, 광주 김대중컨벤션센터) |
| 권호 |
27권 2호, p.1816 |
| 발표분야 |
에너지 환경 |
| 제목 |
Characteristics of the separated plastic waste pyrolysis fuel from a 20 kg scale vacuum distillation system and its application as boiler fuel |
| 초록 |
In this work, plastic waste pyrolysis oil was comprehensively investigated using a 20 kg scale vacuum distillation system in the temperature range of 20-200 ℃ and the vacuum pressure range of 1-100 KPa by separating a total of 74 samples (No.1-74) at different temperatures and different vacuum pressures. The comprehensive characterization of the separated samples showed that with the increase of temperature and vacuum, the viscosity and TAN value of the samples increased, while the water content decreased. The samples of 1-25 showed similar properties to gasoline, including carbon range: C5-C13, viscosity range: 0.55-0.72 and HHV: 42-45 MJ/kg. However, the samples of 33-48 exhibited some characteristics close to kerosene, such as carbon range: C9-C20, viscosity range: 1.07-2.53 and HHV: 44-45 MJ/kg. The samples over No.52 contained more heavy oil content (> C20) with a high viscosity of 3.12-7.55. The uniform transparent pictures and FTIR showed a good miscibility of separated samples and diesel. Finally, both characteristics of samples and the AET analysis are further used for the design of vacuum distillation setup for targeting desired products. |
| 저자 |
왕 슈앙1, 이도연2, 김하나1, 남형석1, 황병욱1, 이경환1, 류호정1
|
| 소속 |
1한국에너지기술(연), 2한밭대 |
| 키워드 |
에너지; 환경
|
| E-Mail |
|
| 원문파일 |
초록 보기 |
