| 학회 |
한국공업화학회 |
| 학술대회 |
2020년 가을 (10/28 ~ 10/30, 광주 김대중컨벤션센터(Kimdaejung Convention Center)) |
| 권호 |
24권 1호 |
| 발표분야 |
포스터-에너지저장·변환 |
| 제목 |
Optimization of fabricating condition for anode by the design of experiment in high temperature Polymer Electrolyte Membrane Fuel Cell |
| 초록 |
The anode of HT-PEMFC makes hydrogen oxidation reaction while prevents outflow of phosphoric acid (PA) as proton conductor. In this study, 0.2mg/cm2 of Pt and PTFE is applied as binder to prevent leak of PA on gas diffusion electrode (GDE). PTFE contents in catalyst layer and heat treatment temperature are compared to find the optimum fabricating condition applying DOE. As a result, the optimum point that has 16.4wt% of PFFE and heat treatment at 307℃ shows 0.636V at 0.2A/cm2 with 0.2mg/cm2 of Pt loading which provide the higher performance than commercial anode GDE. |
| 저자 |
정현승, 전현수, 김도형, 박찬호
|
| 소속 |
광주과학기술원 |
| 키워드 |
High Temperature Polymer Electrolyte Membrane Fuel Cell(HT-PEMFC); Anode; design of experiment (DOE); Polytetrafluoroethylene (PTFE)
|
| E-Mail |
|
