검색결과 : 13건
| No. | Article |
|---|---|
| 1 |
Conversion of Injected Forestry Waste Biomass Charcoal in a Blast Furnace: Influence of Pyrolysis Temperature Solar J, Hippe F, Babich A, Caballero BM, Rodriguez ID, Barriocanal C, Lopez-Urionabarrenechea A, Acha E Energy & Fuels, 35(1), 529, 2021 |
| 2 |
Potentiality of "orujillo" (olive oil solid waste) to produce hydrogen by means of pyrolysis Caballero BM, Lopez-Urionabarrenechea A, Perez B, Solar J, Acha E, de Marco I International Journal of Hydrogen Energy, 45(40), 20549, 2020 |
| 3 |
Hydrogen rich reducing gases generation in the production of charcoal from woody biomass carbonization Adrados A, Lopez-Urionabarrenechea A, Acha E, Solar J, Caballero BM, de Marco I Energy Conversion and Management, 148, 352, 2017 |
| 4 |
Influence of temperature and residence time in the pyrolysis of woody biomass waste in a continuous screw reactor Solar J, de Marco I, Caballero BM, Lopez-Urionabarrenechea A, Rodriguez N, Agirre I, Adrados A Biomass & Bioenergy, 95, 416, 2016 |
| 5 |
Upgrading of chlorinated oils coming from pyrolysis of plastic waste Lopez-Urionabarrenechea A, de Marco I, Caballero BM, Laresgoiti MF, Adrados A Fuel Processing Technology, 137, 229, 2015 |
| 6 |
Empiric model for the prediction of packaging waste pyrolysis yields Lopez-Urionabarrenechea A, de Marco I, Caballero BM, Adrados A, Laresgoiti MF Applied Energy, 98, 524, 2012 |
| 7 |
Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud Lopez A, de Marco I, Caballero BM, Laresgoiti MF, Adrados A, Aranzabal A Applied Catalysis B: Environmental, 104(3-4), 211, 2011 |
| 8 |
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor Lopez A, de Marco I, Caballero BM, Laresgoiti MF, Adrados A Chemical Engineering Journal, 173(1), 62, 2011 |
| 9 |
Dechlorination of fuels in pyrolysis of PVC containing plastic wastes Lopez A, de Marco I, Caballero BM, Laresgoiti MF, Adrados A Fuel Processing Technology, 92(2), 253, 2011 |
| 10 |
Recycling of the Solid Residue Obtained from the Pyrolysis of Fiberglass Polyester Sheet Molding Compound Torres A, De Marco I, Caballero BM, Laresgoiti MF, Chomon MJ, Kondra G Advances in Polymer Technology, 28(2), 141, 2009 |