검색결과 : 6건
| No. | Article |
|---|---|
| 1 |
A comparative in-process monitoring of temperature profile in fused filament fabrication Vanaei HR, Deligant M, Shirinbayan M, Raissi K, Fitoussi J, Khelladi S, Tcharkhtchi A Polymer Engineering and Science, 61(1), 68, 2021 |
| 2 |
Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts Vanaei HR, Raissi K, Deligant M, Shirinbayan M, Fitoussi J, Khelladi S, Tcharkhtchi A Journal of Materials Science, 55(29), 14677, 2020 |
| 3 |
Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication Vanaei H, Shirinbayan M, Deligant M, Raissi K, Fitoussi J, Khelladi S, Tcharkhtchi A Polymer Engineering and Science, 60(8), 1822, 2020 |
| 4 |
Performance assessment of a standard radial turbine as turbo expander for an adapted solar concentration ORC Deligant M, Sauret E, Danel Q, Bakir F Renewable Energy, 147, 2833, 2020 |
| 5 |
A CFD (computational fluid dynamics) study on the effects of operating an engine with low intake valve lift at idle corresponding speed Clenci AC, Iorga-Siman V, Deligant M, Podevin P, Descombes G, Niculescu R Energy, 71, 202, 2014 |
| 6 |
Experimental identification of turbocharger mechanical friction losses Deligant M, Podevin P, Descombes G Energy, 39(1), 388, 2012 |