| 443 - 455 |
A Brief review of Aragonite Precipitated Calcium Carbonate (PCC) Synthesis Methods and
Ramakrishna C, Thenepalli T, Ahn JW |
| 456 - 466 |
교반볼밀을 이용한 금속기반 복합재 제조공정에서 다른 분쇄매체차이에 대한 입자형상변화와 DEM 시뮬레이션 해석
Analysis of Particle Morphology Change and Discrete Element Method (DEM) with Different Grinding Media in Metal-based Composite Fabrication Process Using Stirred Ball Mill
오양가, 보르 암갈란, 바춘홀루 이치커, 이재현, 최희규 |
| 467 - 472 |
고분자-알칼리 전해질이 코팅된 Poly(acrylonitrile) 분리막을 적용한 활성탄 수퍼커패시터 특성
Electrochemical Properties of Activated Carbon Supecapacitor Adopting Poly(acrylonitrile) Separator Coated by Polymer-Alkaline Electrolytes
김광만, 이영기, 고장면 |
| 473 - 477 |
고분자 전해질 연료전지의 전해질 막 두께가 내구성과 성능에 미치는 영향
The Effect of Membrane Thickness on Durability and Performance of Proton Exchange Membrane Fuel Cell
황병찬, 이혜리, 박권필 |
| 478 - 482 |
고분자 전해질 연료전지 구동 조건에 따른 MEA 열화 및 배출수 특성
Degradation of MEA and Characteristics of Outlet Water According to Operation Condition in PEMFC
황병찬, 이세훈, 나일채, 박권필 |
| 483 - 489 |
Deposition of Functional Organic and Inorganic Layer on the Cathode for the Improved Electrochemical Performance of Li-S Battery
Sohn HS |
| 490 - 496 |
Steady State Design for the Separation of Acetone-Chloroform Maximum Boiling Azeotrope Using Three Different Solvents
Pokhrel M, Owusu AD, Cho JH |
| 497 - 502 |
A Study on the Importance of Uninsured (Indirect) Cost Item of Workplace Accidents
Jung CC, Baek JB |
| 503 - 509 |
Precious Metals Extraction Processing in Chloride Media by Using Ionic Liquids as Novel Extractant Systems
Kumar JR, Choi IH, Lee JY |
| 510 - 513 |
A Preliminary Study of Patchouli Oil Extraction by Microwave Air-Hydrodistillation Method
Kusuma HP, Altway A, Mahfud M |
| 514 - 519 |
활성탄을 이용한 Acid Green 27의 흡착평형, 동역학 및 열역학 파라미터의 연구
Adsorption Equilibrium, Kinetic and Thermodynamic Parameter Studies of Acid Green 27 Using Activated Carbon
이종집 |
| 520 - 529 |
Viscometric Studies of Molecular Interactions in Binary Mixtures of Formamide with Alkanol at 298.15 and 308.15 K
Gahlyan S, Verma S, Rani M, Maken S |
| 530 - 534 |
Chitosan as a Flocculant: An Approach to Improve its Solubility for Efficient Harvesting of Microalgae
Sajjad A, Rizwan M, Mujtaba G, Rashid N |
| 535 - 541 |
도금 폐수 중 유가 금속 회수를 위한 이온교환섬유의 상용화기술
Commercialization of Ion Exchange Fiber System for Recovering Valuable Metals in Plating Wastewater
유성식 |
| 542 - 547 |
탈지미세조류로부터 초음파추출을 이용한 항산화 물질 생산 공정 최적화
Process Development for Production of Antioxidants from Lipid Extracted Microalgae Using Ultrasonic-assisted Extraction
조재민, 신슬기, 정현진, 민보라, 김승기, 김진우 |
| 548 - 555 |
접선연소식 보일러에서 미분탄 연소 시 공기 배분의 영향에 대한 전산해석연구
Numerical Simulation on the Effects of Air Staging for Pulverized Coal Combustion in a Tangential-firing Boiler
강기섭, 류창국 |
| 556 - 560 |
Fabrication of Hemoglobin/Silver Nanoparticle Heterolayer for Electrochemical Signal-enhanced Bioelectronic Application
Lee T, Yoon JH, Choi JW |
| 561 - 566 |
굴곡 융착면을 이용한 고밀도폴리에틸렌 관의 버트 융착 공정에서의 열유체 거동 수치모사
Numerical Simulation of Heat and Flow Behaviors in Butt-fusion Welding Process of HDPE Pipes with Curved Fusion Surface
유재현, 최선웅, 안경현, 오주석 |
| 567 - 573 |
WOx/SBA-15 촉매와 과산화수소를 이용한 선박용 경유의 산화 탈황 연구
Oxidative Desulfurization of Marine Diesel Using WOx/SBA-15 Catalyst and Hydrogen Peroxide
오현우, 김지만, 허관선, 우희철 |
| 574 - 577 |
Preliminary Study: Comparison of Kinetic Models of Oil Extraction from Vetiver (Vetiveria Zizanioides) by Microwave Hydrodistillation
Kusuma HS, Rohadi TI, Daniswara EF, Altway A, Mahfud M |
