| 5139 - 5148 |
Bubble nucleation in microchannel flow boiling using single artificial cavity
Lee JY, Kim MH, Kaviany M, Son SY |
| 5149 - 5162 |
Experimental quantification of heat and mass transfer process through vegetated roof samples in a new laboratory setup
Tabares-Velasco PC, Srebric J |
| 5163 - 5172 |
Natural convection heat transfer and fluid dynamics for a pair of vertically aligned isothermal horizontal cylinders
Persoons T, O'Gorman IM, Donoghue DB, Byrne G, Murray DB |
| 5173 - 5182 |
Buoyancy induced convection in a porous cavity with partially thermally active sidewalls
Sankar M, Bhuvaneswari M, Sivasankaran S, Do Y |
| 5183 - 5191 |
Large "near junction" thermal resistance reduction in electronics by interface nanoengineering
Hu M, Zhang XL, Poulikakos D, Grigoropoulos CP |
| 5192 - 5199 |
Influence of material properties on temperature and thermal stress of thermal barrier coating near a normal cooling hole
Kim KM, Shin S, Lee DH, Cho HH |
| 5200 - 5206 |
Numerical modelling of the self-heating process of a wet porous medium
Ejlali A, Mee DJ, Hooman K, Beamish BB |
| 5207 - 5215 |
Thermal design of an orthotropic flat fin in fin-and-tube heat exchangers operating in dry and wet environments
Kundu B, Lee KS |
| 5216 - 5230 |
Evaporation and transport of non-dilute, multi-component liquid mixtures in porous wicks: Simulation and experimental validation
Beyhaghi S, Pillai KM, Qadah DT, Dietz ML |
| 5231 - 5241 |
Experimental investigation of flow assisted mixed convection in high porosity foams in vertical channels
Kamath PM, Balaji C, Venkateshan SP |
| 5242 - 5252 |
Convection heat transfer in concentric micro annular tubes with constant wall temperature
Hong C, Asako Y, Suzuki K |
| 5253 - 5261 |
A numerical investigation of 3-D flow regimes in a toroidal natural convection loop
Ridouane E, Hitt DL, Danforth CM |
| 5262 - 5274 |
Effect of thermal buoyancy on vortex shedding behind a square cylinder in cross flow at low Reynolds numbers
Chatterjee D, Mondal B |
| 5275 - 5285 |
Inverse estimation of the unknown heat flux boundary with irregular shape fins
Lin DTW, Yang CY, Li JC, Wang CC |
| 5286 - 5297 |
Analysis of heat flux bifurcation inside porous media incorporating inertial and dispersion effects - An exact solution
Yang K, Vafai K |
| 5298 - 5305 |
Stability analysis and maldistribution control of two-phase flow in parallel evaporating channels
Zhang TJ, Wen JT, Julius A, Peles Y, Jensen MK |
| 5306 - 5318 |
Heat transfer modeling in data centers
Lopez V, Hamann HF |
| 5319 - 5326 |
Modeling of transport phenomena in direct laser deposition of metal matrix composite
Wen SY, Shin YC |
| 5327 - 5336 |
Convective boiling of R-123/oil mixtures on enhanced tube bundles having pores and connecting gaps
Kim NH, Byun HW, Lee EJ |
| 5337 - 5347 |
Scalar transport from a planar source in a turbulent boundary layer
Sideridis GA, Kastrinakis EG, Nychas SG, Rapsomanikis S |
| 5348 - 5358 |
The effects of surfactant monolayers on free surface natural convection
Bower SM, Saylor JR |
| 5359 - 5367 |
Critical heat flux of pool boiling on Si nanowire array-coated surfaces
Lu MC, Chen RK, Srinivasan V, Carey V, Majumdar A |
| 5368 - 5378 |
Investigation of transient redox electrochemical MHD using numerical simulations
Sen D, Isaac KM, Leventis N, Fritsch I |
| 5379 - 5385 |
Minichannels with carbon nanotube structured surfaces for cooling applications
Shenoy S, Tullius JF, Bayazitoglu Y |
| 5386 - 5394 |
Inverse estimation of inlet parameters in an axisymmetric cylindrical combustor with thermal radiation effect
Lee KH, Baek SW |
| 5395 - 5405 |
Fluidic control with microjets in dump combustors
Kanchi H, Russell K, Anderson MJ, Beard SF, Strykowski PJ, Mashayek F |
| 5406 - 5414 |
A two-equation model for thermally developing forced convection in porous medium with viscous dissipation
Chen GM, Tso CP |
| 5415 - 5426 |
Optimal convective heat transfer in double pipe with parabolic fins
Iqbal Z, Syed KS, Ishaq M |
| 5427 - 5437 |
The thermal problem of friction for a three-element tribosystem with composite strip
Yevtushenko AA, Kuciej M |
| 5438 - 5443 |
Transient heat conduction in a functionally graded strip in contact with well stirred fluid with an outside heat source
Zhou YT, Lee KY, Yu DH |
| 5444 - 5458 |
Heat transport from a bluff body near a moving wall at Re=100
Dhinakaran S |
| 5459 - 5469 |
A combined transient thermal model for laser hyperthermia of tumors with embedded gold nanoshells
Dombrovsky LA, Timchenko V, Jackson M, Yeoh GH |
| 5470 - 5480 |
Development and testing of a constructal microchannel flow system with dynamically controlled complexity
Hart RA, Ponkala MJV, da Silva AK |
| 5481 - 5490 |
The effects of the evaluation method on the average heat transfer coefficient for a mini-channel tube bundle
Jeong JH, Nam KW, Min JK, Kim KS, Ha MY |
| 5491 - 5496 |
Theoretical study of the effective thermal conductivity of graphite foam based on a unit cell model
Leong KC, Li HY |
| 5497 - 5503 |
Low grade heat driven multi-effect distillation technology
Wang XL, Christ A, Regenauer-Lieb K, Hooman K, Chua HT |
| 5504 - 5516 |
Hydraulic and thermal characteristics of a vapor venting two-phase microchannel heat exchanger
David MP, Miler J, Steinbrenner JE, Yang YZ, Touzelbaev M, Goodson KE |
| 5517 - 5526 |
Horizontal chain coalescence of bubbles in saturated pool boiling on a thin foil
Golobic I, Petkovsek J, Gjerkes H, Kenning DBR |
| 5527 - 5539 |
Heat transfer from a hot moving cylinder impinged by a planar subcooled water jet
Gradeck M, Kouachi A, Borean JL, Gardin P, Lebouche M |
| 5540 - 5544 |
Numerical study of the influence of melt convection on the crucible dissolution rate in a silicon directional solidification process
Popescu A, Vizman D |
| 5545 - 5553 |
Controlling heat transfer in micro electron beam welding using volumetric heating
Gajapathi SS, Mitra SK, Mendez PF |
| 5554 - 5567 |
Thermal performance of a novel heat transfer fluid containing multiwalled carbon nanotubes and microencapsulated phase change materials
Tumuluri K, Alvarado JL, Taherian H, Marsh C |
| 5568 - 5573 |
Some explicit analytical solutions of field synergy for steady 2D incompressible laminar flow in cylindrical coordinates
Li YY, Liu QB, Cai RX |
| 5574 - 5587 |
The thermal response of an infinite line of open loop wells for ground coupled heat pump systems
Woods K, Ortega A |
| 5588 - 5594 |
Stagnation-point flow of a nanofluid towards a stretching sheet
Mustafa M, Hayat T, Pop I, Asghar S, Obaidat S |
| 5595 - 5601 |
The effects of combined horizontal and vertical heterogeneity on the onset of convection in a porous medium with horizontal throughflow
Nield DA, Kuznetsov AV |
| 5602 - 5611 |
Experimental study on liquid flow and heat transfer in micro square pin fin heat sink
Liu MH, Liu D, Xu S, Chen YL |
| 5612 - 5622 |
Bubble nucleation, growth and surface temperature oscillations on a rapidly heated microscale surface immersed in a bulk subcooled but locally superheated liquid under partial vacuum
Cavicchi RE, Avedisian CT |
| 5623 - 5632 |
Non-equilibrium molecular dynamics simulation study of heat transport in hexahydro-1,3,5-trinitro-s-triazine (RDX)
Izvekov S, Chung PW, Rice BM |
| 5633 - 5642 |
Unsteady hydromagnetic convective flow in a vertical channel using Darcy-Brinkman-Forchheimer extended model with heat generation/absorption: Analysis with asymmetric heating/cooling of the channel walls
Singh AK, Kumar R, Singh U, Singh NP, Singh AK |
| 5643 - 5652 |
A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces
Jo H, Ahn HS, Kane S, Kim MH |
| 5653 - 5657 |
Convection in a porous layer with a surface reaction
Scott NL, Straughan B |
| 5658 - 5662 |
Forced convective heat transfer in all metallic wire-woven bulk Kagome sandwich panels
Joo JH, Kang KJ, Kim T, Lu TJ |
