| 15045 - 15051 |
Graphite-nanofiber-supported porous Pt-Ag nanosponges: Synthesis and oxygen reduction electrocatalysis
Lee CL, Chao YJ, Chen CH, Chiou HP, Syu CC |
| 15052 - 15059 |
Effect of deposition potential on the structure and electrocatalytic behavior of Pt micro/nanoparticles
Zhang HM, Jiang FX, Zhou R, Du YK, Yang P, Wang CY, Xu JK |
| 15060 - 15067 |
Heat-treated platinum nanoparticles embedded in nitrogen-doped ordered mesoporous carbons: Synthesis, characterization and their electrocatalytic properties toward methanol-tolerant oxygen reduction
Liu SH, Chen SC, Sie WH |
| 15068 - 15074 |
Electrochemical growth and oxygen reduction property of Ag nanosheet arrays on a Ti/TiO2 electrode
Lee CL, Syu CC |
| 15075 - 15080 |
Effect of Titanium additive element on the discharging behavior of MgNi Alloy electrode
Anik M |
| 15081 - 15088 |
Study of catalyst sprayed membrane under irradiation method to prepare high performance membrane electrode assemblies for solid polymer electrolyte water electrolysis
Su HN, Bladergroen BJ, Linkov V, Pasupathi S, Ji S |
| 15089 - 15104 |
Prospects for alkaline zero gap water electrolysers for hydrogen production
Pletcher D, Li XH |
| 15105 - 15110 |
Enhanced hydrogen generation using a saline catholyte in a two chamber microbial electrolysis cell
Nam JY, Logan BE |
| 15111 - 15118 |
Effect of Si content on H-2 production using Al-Si alloy powders
Yoo HS, Ryu HY, Cho SS, Han MH, Bae KS, Lee JH |
| 15119 - 15124 |
Effects of amalgam on hydrogen generation by hydrolysis of aluminum with water
Huang XN, Lv CJ, Huang YX, Liu S, Wang C, Chen D |
| 15125 - 15135 |
Oxidation reaction kinetics for the steam-iron process in support of hydrogen production
Stehle RC, Bobek MM, Hooper R, Hahn DW |
| 15136 - 15144 |
Generation of hydrogen from aluminum and water - Effect of metal oxide nanocrystals and water quality
Wang HW, Chung HW, Teng HT, Cao GZ |
| 15145 - 15152 |
Hydrogen generation by mechanochemical reaction of quartz powders in water
Delogu F |
| 15153 - 15159 |
Si/ZnO core-shell nanowire arrays for photoelectrochemical water splitting
Shi MM, Pan XW, Qiu WM, Zheng DX, Xu MS, Chen HZ |
| 15160 - 15167 |
Comparative analysis of thermophilic immobilized biohydrogen production using packed materials of ceramic ring and pumice stone
Keskin T, Aksoyek E, Azbar N |
| 15168 - 15176 |
Effects of culture parameters, light, and mixing on H-2 production by sulfur-deprived Chlamydomonas reinhardtii in flat plate reactor
Zhang T |
| 15177 - 15186 |
Simultaneous analysis of carbohydrates and volatile fatty acids by HPLC for monitoring fermentative biohydrogen production
de Sa LRV, de Oliveira MAL, Cammarota MC, Matos A, Ferreira-Leitao VS |
| 15187 - 15194 |
Fermentative hydrogen production from different sugars by Citrobacter sp CMC-1 in batch culture
Mangayil R, Santala V, Karp M |
| 15195 - 15202 |
Promotion of H-2 production from ethanol steam reforming by zeolite basicity
Inokawa H, Nishimoto S, Kameshima Y, Miyake M |
| 15203 - 15211 |
The effect of gold on the copper-zinc oxides catalyst during the partial oxidation of methanol reaction
Huang YJ, Ng KL, Huang HY |
| 15212 - 15220 |
Thermodynamic and experimental study of combined dry and steam reforming of methane on Ru/ZrO2-La2O3 catalyst at low temperature
Soria MA, Mateos-Pedrero C, Guerrero-Ruiz A, Rodriguez-Ramos I |
| 15221 - 15230 |
Stepwise production of syngas and hydrogen through methane reforming and water splitting by using a cerium oxide redox system
Jeong HH, Kwak JH, Han GY, Yoon KJ |
| 15231 - 15238 |
Destabilization of LiBH4 by MH2 (M = Ce, La) for hydrogen storage: Nanostructural effects on the hydrogen sorption kinetics
Gennari FC |
| 15239 - 15249 |
A generalized cryo-adsorber model and 2-D refueling results
Kumar VS |
| 15250 - 15258 |
The on demand generation of hydrogen from Co-Ni bimetallic nano catalyst prepared by dual use of hydrogel: As template and as reactor
Sahiner N, Ozay O, Aktas N, Inger E, He JB |
| 15259 - 15265 |
Alane hydrogen storage for automotive fuel cells - Off-board regeneration processes and efficiencies
Hua TQ, Ahluwalia RK |
| 15266 - 15272 |
A comparative study of LiBH4-based composites with metal hydrides and fluorides for hydrogen storage
Yuan PP, Liu BH, Li ZP |
| 15273 - 15282 |
Numerical analysis of convective and diffusive fuel transports in high -temperature proton-exchange membrane fuel cells
Sohn YJ, Kim M, Yang TH, Kim K |
| 15283 - 15294 |
Metamodel based design optimization approach in promoting the performance of proton exchange membrane fuel cells
Miao JM, Cheng SJ, Wu SJ |
| 15295 - 15303 |
Characterization of (Y1-xCax)BaCo4-yZnyO7 as cathodes for intermediate temperature solid oxide fuel cells
Kim YN, Kim JH, Manthiram A |
| 15304 - 15312 |
A new analytical approach to evaluate and optimize the performance of an irreversible solid oxide fuel cell-gas turbine hybrid system
Zhang XQ, Su SH, Chen JC, Zhao YR, Brandon N |
| 15313 - 15322 |
Effects of porous and dense electrode structures of membrane electrode assembly on durability of direct methanol fuel cells
Park YC, Kang S, Kim SK, Lim S, Jung DH, Lee DY, Shul YG, Peck DH |
| 15323 - 15332 |
Magnetic field aligned nanocomposite proton exchange membranes based on sulfonated poly (ether sulfone) and Fe2O3 nanoparticles for direct methanol fuel cell application
Hasanabadi N, Ghaffarian SR, Hasani-Sadrabadi MM |
| 15333 - 15343 |
Synthesis and characterization of new sulfonated polytriazole proton exchange membrane by click reaction for direct methanol fuel cells (DMFCs)
Huang YJ, Ye YS, Yen YC, Tsai LD, Hwang BJ, Chang FC |
| 15344 - 15351 |
Microbial fuel cell using ferrous ion activated persulfate as a cathodic reactant
Wang Y, Niu CG, Zeng GM, Hu WJ, Huang DW, Ruan M |
| 15352 - 15363 |
Effect of mesoporous silica modification on the structure of hybrid carbon membrane for hydrogen separation
Tseng HH, Shiu PT, Lin YS |
| 15364 - 15371 |
Influence of surface activation on the hydrogen permeation properties of PdAg cathode membrane
Jovanovic Z, De Francesco M, Tosti S, Pozio A |
| 15372 - 15381 |
Forced unsteady state operation to improve H-2 permeability through Pd-Ag membrane during start-up
Budhi YW, Noezar I, Aldiansyah F, Kemala PV, Padama AAB, Kasai H, Subagjo |
| 15382 - 15391 |
Diesel-like and HCCI-like operation of a truck engine converted to hydrogen
Boretti AA |
| 15392 - 15402 |
Ignition characteristics of heptane-hydrogen and heptane-methane fuel blends at elevated pressures
Aggarwal SK, Awomolo O, Akber K |
| 15403 - 15413 |
Counterflow diffusion flame of hydrogen-enriched biogas under MILD oxy-fuel condition
Chen S, Zheng CG |
| 15414 - 15426 |
Effects of hydrogen peroxide on combustion enhancement of premixed methane/air flames
Chen GB, Li YH, Cheng TS, Hsu HW, Chao YC |
| 15427 - 15436 |
Investigations on the variation of corrosion and contact resistance characteristics of metallic bipolar plates manufactured under long-run conditions
Peker MF, Cora ON, Koc M |
| 15437 - 15445 |
Preparation and properties of thin Pt-Ir films deposited by dc magnetron co-sputtering
Topalov G, Ganske G, Lefterova E, Schnakenberg U, Slavcheva E |
| 15446 - 15454 |
Hydrogen-sensitive sensor with stabilized Pd-mixture forming sensing nanoparticles on an interlayer
Tan SW, Tsai JH, Lai SW, Lo C, Lour WS |
| 15455 - 15455 |
Numerical analyses of high Reynolds number flow of high pressure fuel gas through rough pipes (vol 35, pg 7568, 2010)
Cadorin M, Morini M, Pinelli M |
