2071 - 2076 |
Green synthesized Au-Ag bimetallic nanoparticles modified electrodes for the amperometric detection of hydrogen peroxide Tsai TH, Thiagarajan S, Chen SM |
2077 - 2090 |
Flow injection potentiometric determination of Chlorphenoxamine Hydrochloride Abdel-Ghani NT, Hussein SH |
2091 - 2098 |
An understanding of the electrodeposition process of Al-Mg alloys using an organometallic-based electrolyte Tatiparti SSV, Ebrahimi F |
2099 - 2105 |
Amperometric hydrogen peroxide biosensor based on a modified gold electrode with silver nanowires Song MJ, Hwang SW, Whang D |
2107 - 2115 |
Inhibition effect of methyl violet on the corrosion of cold rolled steel in 1.0 M sulfuric acid solution Deng SD, Li XH, Fu H |
2117 - 2124 |
Fluorination of Vulcan XC-72R for cathodic microporous layer of passive micro direct methanol fuel cell Chen M, Wang SJ, Zou ZQ, Yuan T, Li ZL, Akins DL, Yang H |
2125 - 2133 |
Improved performance of the direct methanol redox fuel cell Ilicic AB, Dara MS, Wilkinson DP, Fatih K |
2135 - 2143 |
Corrosion inhibition of mild steel in acidic medium by poly (aniline-co-o-toluidine) doped with p-toluene sulphonic acid Srivastava V, Singh MM |
2145 - 2151 |
Properties of silver-tin alloys obtained from pyrophosphate-cyanide electrolytes containing EDTA salts Hrussanova A, Krastev I, Beck G, Zielonka A |
2153 - 2160 |
Estimation of dehumidifying performance of solid polymer electrolytic dehumidifier for practical application Sakuma S, Yamauchi S, Takai O |
2161 - 2169 |
Synthesis and characterization of Ni-Al2O3 composite coatings containing different forms of alumina Aruna ST, Grips VKW, Rajam KS |
2171 - 2183 |
An experimental and theoretical investigation of adsorption characteristics of a Schiff base compound as corrosion inhibitor at mild steel/hydrochloric acid interface Ahamad I, Gupta C, Prasad R, Quraishi MA |
2185 - 2191 |
Non-woven fabric supported poly(acrylonitrile-vinyl acetate) gel electrolyte for lithium ion battery use Li XP, Rao MM, Liao YH, Li WS, Xu MQ |
2193 - 2202 |
A new class of Sol-gel derived LiM1xM2yMn2-x-yO3.8F0.2 (M-1 = Cr, M-2 = V; x = y=0.2) cathodes for lithium batteries Jayaprakash N, Kalaiselvi N, Doh CH, Gangulibabu, Bhuvaneswari D |