| 2151 - 2157 |
Removal of formaldehyde at low concentration using various activated carbon fibers
Song Y, Qiao W, Yoon SH, Mochida I, Guo Q, Liu L |
| 2158 - 2168 |
Pectin and acrylamide based hydrogels for environment management technologies: Synthesis, characterization, and metal ions sorption
Chauhan GS, Kumari A, Sharma R |
| 2169 - 2176 |
Polymerization at the Gas/Solution interface: Preparation of polymer microstructures with gas bubbles as templates
Mazur M, Frydrychewicz A |
| 2177 - 2184 |
Electrospun hydroxypropyl methyl cellulose phthalate (HPMCM/Erythromycin fibers for targeted release in intestine
Wang M, Wang L, Huang Y |
| 2185 - 2191 |
Preparation and polymerization of bismaleimide compounds
Sava M, Sava I, Cozan V, Tanasa F |
| 2192 - 2197 |
Testing by Fourier transform infrared species variation during melamine-urea-formaldehyde resin preparation
Kandelbauer A, Despres A, Pizzi A, Taudes I |
| 2198 - 2203 |
Curing Behavior of liquid crystalline Epoxy/DGEBA blend
Jang J, Lee JY |
| 2204 - 2209 |
NR/PP thermoplastic vulcanizates: Selection of optimal peroxide type and concentration in relation to mixing conditions
Thitithammawong A, Nakason C, Sahakaro K, Noordermeer JWM |
| 2210 - 2217 |
Effect of clay on mechanical and gas barrier properties of blown film LDPE/Clay nanocomposites
Arunvisut S, Phummanee S, Somwangthanaroj A |
| 2218 - 2230 |
Thermal characterization of polyethylene blends with a biodegradable masterbatch subjected to thermo-oxidative treatment and subsequent soil burial test
Santonja-Blasco L, Contat-Rodrigo L, Moriana-Torro R, Ribes-Greus A |
| 2231 - 2237 |
Effect of silane-coupling agents on interfacial properties of CF/PI composites
He JM, Huang YD |
| 2238 - 2250 |
Manipulating the phase morphology in PPS/PA66 blends using clay
Zou H, Ning N, Su R, Zhang Q, Fu Q |
| 2251 - 2262 |
Surface modification of Aramid fibers with gamma-ray radiation for improving interfacial bonding strength with epoxy resin
Zhang YH, Huang YD, Liu L, Wu L |
| 2263 - 2266 |
Effect of sequence distribution of PES/PEES random, block, and alternative copolymers on Excimer formation in solution
Zhou XM |
| 2267 - 2273 |
Investigating the jet stretch in the wet spinning of PAN fiber
Zeng XM, Hu J, Zhao JX, Zhang YW, Pan D |
| 2274 - 2281 |
Effect of furfuryl alcohol addition on the cure of furfuryl alcohol resin used in the glassy carbon manufacture
Gaefke CB, Botelho EC, Ferreira NG, Rezende MC |
| 2282 - 2289 |
Synthesis, characterization, thermal stability, conductivity, and band gap of a new aromatic polyether containing an azomethine as a side
Kaya I, Yidirim M |
| 2290 - 2297 |
Polyurethane composites based on oil palm empty fruit bunches: Effect of Isocyanate/Hydroxyl ratio and chemical modification of empty fruit bunches with toluene diisocyanate and hexamethylene diisocyanate on mechanical properties
Rozman HD, Hilme KRA, Abubakar A |
| 2298 - 2312 |
In Situ fiber composites based on metallocene polyethylene matrices
Cardenas MA, Perera R, Villarreal N, RosaleS C, Pastor JM |
| 2313 - 2319 |
Lignins for phenol replacement in novolac-type phenolic formulations, part I: Lignophenolic resins synthesis and characterization
Tejado A, Kortaberria G, Pena C, Labidi J, Echeverria JM, Mondragon I |
| 2320 - 2327 |
Optical loss changes in siloxane polymer waveguides during thermal curing
Hegde SG, Liu F, Chang GK, Sitaraman SK |
| 2328 - 2341 |
Phase inversion of polyacrylamide based inverse-emulsions: Effect of the surfactant and monomer on postinversion equilibrium properties
Armanet L, Hunkeler D |
| 2342 - 2349 |
Development of a new infrared device for monitoring the coefficient of variation in yarns
Huang CC, Tang TT |
| 2350 - 2362 |
Characterization of soy-based polyurethane networks prepared with different diisocyanates and their blends with petroleum-based polyols
Pechar TW, Wilkes GL, Zhou B, Luo N |
| 2363 - 2370 |
Selective chemical absorbance in electrosupun nonwovens
Xiang CH, Frey MW, Taylor AG, Rebovich ME |
| 2371 - 2379 |
Hydrolyzed collagen-based hydrogel with salt and pH-responsiveness properties
Pourjavadi A, Salimi H, Kurdtabar M |
| 2380 - 2390 |
Water sorption kinetics in light-cured Poly-HEMA and pol (HEMA-co-TEGDMA); Determination of the self-diffusion coefficient by new iterative methods
Sideridou ID, Papanastasiou GE |
| 2391 - 2397 |
Novel flame retardant thermosets from nitrogen-containing and phosphorus-containing epoxy resins cured with dicyandiamide
Zhang XH, Liu F, Chen S, Qi GR |
| 2398 - 2404 |
Acrylic pressure-sensitive adhesive for transdermal drug delivery systems
Czech Z, Kurzawa R |
| 2405 - 2412 |
Pseudospecific magnetic affinity beads for immunoglobulin-g depletion from human serum
Akgol S, Ozkara S, Uzun L, Yilmaz F, Denizli A |
| 2413 - 2421 |
Synthesis of hyperbranched aromatic polyamide-imide and its grafting onto multiwalled carbon nanotubes
Feng QP, Xie XM, Liu YT, Zhao W, Gao YF |
| 2422 - 2426 |
Removal of basic dyes from aqueous solutions using starch-Graft-acrylic acid copolymers
Guclu G, Keles S |
| 2427 - 2435 |
The synthesis, characterization, and DC electrical conductivity of poly[di(2,5-dimercapto-1,3,4-thiadiazole)-metal] complexes
El-Shekeil AG, Al-Maydama HM, Al-Shuja's OM |
| 2436 - 2441 |
Aluminium-filled low-density polyethylene - Structural, morphological, and mechanical properties
Dasture MD, Kelkar DS |
| 2442 - 2447 |
Preparation of unsaturated polyester-silica nanocomposites
Chung CM, Cho SY, Kim JG, Oh SY |
| 2448 - 2455 |
Preparation, characterization, and metal ion retention capacity of Co(II) and Ni(II) from Poly(p-HO- and p-Cl-phenylmaleimide-co-2-hydroxypropylmethacrylate) using the ultra filtration technique
Pizarro GDC, Marambio OG, Jeria-Orell M, Oyarzun DP, Rivas BL, Habicher WD |
| 2456 - 2462 |
Electrical conductivity model filled liquid crystal polymer evaluation of carbon fiber composites
Barton RL, Keith JM, King JA |
| 2463 - 2471 |
Synthesis and comparative physicochemical investigation of partly aromatic cardo copolyesters
Joshi NB, Raja A, Parsania PH |
| 2472 - 2478 |
Damping behavior of sandwich beam laminated with CHR/petroleum resins blends by DMA measurement
Li C, Wu GZ, Xiao FY, Wu CF |
| 2479 - 2484 |
Studies of precipitated polymerization of acrylamide with quaternary ammonium cationic comonomer in potassium citrate solution
Li G, Yang C, He YG, Yang F, Yu XQ |
| 2485 - 2493 |
Preparation of resistant starch/poly(vinyl alcohol) blend films with added plasticizer and crosslinking agents
Yoon SD, Chough SH, Park HR |
| 2494 - 2501 |
Synthesis and properties of polyamide-imides containing fluorenyl cardo structure
Hu ZQ, Li SJ, Zhang CH |
| 2502 - 2514 |
Interrogation of "surface," "skin," and "core" orientation in thermotropic liquid-crystalline copolyester moldings by near-edge x-ray absorption fine structure and wide-angle x-ray scattering
Rendon S, Bubeck RA, Thomas LS, Burghardt WR, Hexemer A, Fischer DA |
| 2515 - 2523 |
Polycaprolactone-based shape memory segmented polyurethane fiber
Meng QH, Hu JL, Zhu Y, Lu J, Liu Y |
| 2524 - 2535 |
Blends of poly(ethylene terephthalate) and low density polyethylene containing aluminium: a material obtained from packaging recycling
Lopes CMA, Goncalves MDC, Felisberti MI |
| 2536 - 2542 |
A novel method for porosity measurement of various surface layers of nanofibers mat using image analysis for tissue engineering applications
Ghasemi-Mobarakeh L, Semnani D, Morshed M |
| 2543 - 2547 |
Reverse atom transfer radical polymerization of methyl methacrylate in different solvents
Pan K, Jiang L, Zhang J, Dan Y |
| 2548 - 2558 |
Crystallization of poly(3-hydroxybutyrate) by exfoliated graphite nanoplatelets
Miloaga DG, Hosein HAA, Misra M, Drzal LT |
| 2559 - 2564 |
Antiwrinkle treatment of cotton fabric with a mixed sol of TEOS-TTB/DMDHEU
Huang KS, Yang KL, Lin SJ, Lian WT |
| 2565 - 2570 |
Friction and wear properties of NBR/PVC composites
Huang XW, Tian N, Wang TM, Wang K, Xue QJ |
| 2571 - 2574 |
Esterification effect of maleic anhydride on swelling properties of natural fiber/high density polyethylene composites
Naik JB, Mishra S |
| 2575 - 2579 |
Moisture diffusion into palm/polypropylene composites in sodium chloride solutions
Kahraman R, Abu-Sharkh BF |
| 2580 - 2583 |
Influence of electric and mechanical forces on the oxidation kinetics and electroconductive polyisoprene composition properties
Gul' VE, Kirsh IA, Kvasnikova EV, Zabulonov DU, Soina MV, Zaikov GE |
| 2584 - 2592 |
Preparation, characterization, and utilization of cationized hemp as anion exchanger for removing permanganates and dichromate anions
Fahmy HM, Kohler R |
| 2593 - 2598 |
Curing and thermal behaviour of epoxy resin in the presence of pyromellitic dianhydride and imidazole
Jain R, Choudhary V, Narula AK |
| 2599 - 2604 |
Modification of polysulfide sealant with polysulfide polythio-urethane-urea
Quan YW, He P, Zhou BJ, Chen QM |
| 2605 - 2614 |
Crystallization behavior of carbon nanofiber/linear low density polyethylene nanocomposites
Lee SH, Kim MS, Ogale AA |
| 2615 - 2624 |
Studies on the electrical diffusivities of mono-carboxylates through heterogeneous anion exchange membranes
Balaji V, Adhikary SK, Ray P |
| 2625 - 2633 |
Filmogen organic-inorganic hybrids obtained by sol-gel in the presence of cationic polymer
Donescu D, Serban S, Uricanu V, Duits M, Perichaud A, Olteanu M, Spiroiu M, Vasilescu M |
| 2634 - 2639 |
Antimicrobial finishing of cellulose with incorporation of aminopyridinium salts to reactive and direct dyed fabrics
Zhao T, Sun G |
| 2640 - 2647 |
Morphological features and melting behavior of nanocomposites based on isotactic polypropylene and multiwalled carbon nanotubes
Avila-Orta CA, Medellin-Rodriguez FJ, Davila-Rodriguez MV, Aguirre-Figueroa YA, Yoon K, Hsiao BS |
| 2648 - 2655 |
Toughening and compatibilization of polyphenylene sulfide/nylon 66 blends with SEBS and maleic anhydride grafted SEBS triblock copolymers
Tang WH, Hu XY, Tang J, Jin RG |
| 2656 - 2660 |
Photopolymerization of clay/polyurethane nanocomposites induced by intercalated initiator
Tan HL, Nie J |
| 2661 - 2667 |
Photocatalytic functional cotton fabrics containing benzophenone chromophoric groups
Hong KH, Sun G |
| 2668 - 2674 |
Kinetics and mechanism of the decay of methyl cellulose-manganate(VI) polysaccharide transient species-novel spectrophotometric kinetic trace of methyl cellulose hypomangate(V) gel intermediate polysaccharide
Shaker AM, El-Khatib RM, Mahran HS |
| 2675 - 2682 |
Preparation and characterization of soluble polyaniline
Dan A, Sengupta PK |
| 2683 - 2688 |
Convenient and efficient synthesis of a lanthanide(3+)-coordinated, diethylene triamine pentaacetic acid labeled biopolymer as an assay for the cholecystokinin B receptor
Gao F, Handl H, Vagner J, Hruby V, Gillies R |
| 2689 - 2695 |
Azobisisobutyronitrile-initiated free-radical copolymerization of limonene with vinyl acetate: Synthesis and characterization
Sharma S, Srivastava AK |
| 2696 - 2702 |
Effects of cashew nut shell liquid as a plasticizer on cure characteristics, processability, and mechanical properties of 50 : 50 NR/EPDM blends: A comparison with paraffin oil
Arayapranee W, Rempel GL |
| 2703 - 2709 |
Crystalline structure of poly(ethylene terephthalate) filaments
Youssefi M, Morshed M, Kish MH |
| 2710 - 2717 |
Mechanical and thermal properties of polycarbonate. II. Influence of titanium dioxide content and quenching on Pigmented polycarbonate
Rouabah F, Fois M, Ibos L, Boudenne A, Dadache D, Haddaoui N, Ausset P |
| 2718 - 2723 |
Crystallization behavior of dry-brush PEO-PS block copolymer and PEO homopolymer blend
Gao Y, Liu HL |
| 2724 - 2729 |
Application of lipase immobilized on nylon-6 for the synthesis of butyl acetate by transesterification reaction in n-heptane
Pahujani S, Shukla SK, Bag BP, Kanwar SS, Gupta R |
| 2730 - 2735 |
Preparation of normal-phase HPLC stationary phase based on monodisperse hydrophilic polymeric beads and their application
Gong BL, Ren L, Yan C |
| 2736 - 2745 |
Binding of several heavy metal ions by polyaspartyl polymers and their application to some Chinese herbal medicines
Sun B, Mi ZT, An G, Liu GZ |
| 2746 - 2752 |
Effect of the stress relaxation property of acrylic pressure-sensitive adhesive on light-leakage phenomenon of polarizer in liquid crystal display
Chun H, Kim HA, Kim G, Kim J, Lim KY |
| 2753 - 2758 |
Influence of TESPT content on crosslink types and rheological Behaviors of natural rubber compounds reinforced with silica
Choi SS, Kim IS, Woo CS |
| 2759 - 2762 |
Enzymatic retting of Kudzu fibers
Kawahara Y, Tsuda T, Minami H, Nishiuchi S, Endo R |
| 2763 - 2768 |
Carbamoyl ethylation of starch for enhancing the adhesion capacity to fibers
Zhu ZF, Chen PH |
| 2769 - 2774 |
Synthesis and characterization of 4,4'-diaminodiphenyl methane-based benzoxazines and their polymers
Men WW, Lu ZJ |
| 2775 - 2779 |
Porous structure and liquid-phase adsorption properties of activated carbon aerogels
Yang WJ, Wu DC, Fu RW |
| 2780 - 2790 |
Fabrication and characteristics of hydroxyapatite reinforced polypropylene as a bone analogue biomaterial
Liu Y, Wang M |
| 2791 - 2799 |
Preparation and selective binding characterization of bisphenol a imprinted polyethersulfone particles
Yang KG, Li BQ, Zhou H, Ma JJ, Bai PL, Zhao CS |
| 2800 - 2807 |
Synthesis and characterization of resol-layered silicate nanocomposites
Lopez M, Blanco M, Ramos JA, Vazquez A, Gabilondo N, del Val JJ, Echeverria JM, Mondragon I |
| 2808 - 2816 |
Synthesis, properties, and gas permeation performance of cardo poly(arylene ether sulfone)s containing phthalimide side groups
Chen G, Zhang XS, Zhang SB, Chen TL, Wul YL |
| 2817 - 2824 |
Structure and properties of cellulose nanocomposite films containing melamine formaldehyde
Henriksson M, Berglund LA |
| 2825 - 2830 |
A new technique for foaming submicron size poly(methyl methacrylate) particles
Ogawa H, Ito A, Taki K, Ohshirna M |
| 2831 - 2839 |
Effect of molecular relaxation of acrylic elastomers on impact toughening of polybutylene terephthlate
Mekhilef N, Hong S, Davis B |
| 2840 - 2842 |
Halogen-free solvent for oxidative carbonylation of bisphenol A to polycarbonate
Okamoto M, Sugiyama JI, Takeuchi K |
