| 2059 - 2066 |
Preparation of an organomontmorillonite master batch and its application to high-temperature-vulcanized silicone-rubber systems
Wang JC, Chen YH |
| 2067 - 2073 |
Novel jute yarns grafted with methyl methacrylate
Montazer M, Salehi A |
| 2074 - 2081 |
Graft copolymerization of methyl methacrylate with an N-substituted maleimide-liquid-crystalline copolymer by atom transfer radical polymerization
Cakir T, Onen A, Serhatli IE |
| 2082 - 2088 |
Attapulgite@polymer particles with double-layer polymer shell via soapless seeded emulsion polymerization
Liu YS, Liu P, Su ZX |
| 2089 - 2094 |
Preparation and evaluation of nonionic amphiphilic phenolic biocides in urethane hydrogels
Wynne JH, Pant RR, Jones-Meehan JM, Phillips JP |
| 2095 - 2100 |
Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging
Kawakami H, Watanabe M |
| 2101 - 2108 |
Gelation of methylcellulose hydrogels under isothermal conditions
Joshi SC, Su JC, Liang CM, Lam YC |
| 2109 - 2117 |
Nonisothermal crystallization kinetics of poly(vinylidene fluoride) in a poly(vinylidene fluoride)/dibutyl phthalate/di(2-ethylhexyl)phthalate system phase separation
Ji GL, Zhu BK, Zhang CF, Xu YY |
| 2118 - 2125 |
Light-triggered reversible solubility of alpha-cyclodextrin and azobenzene moiety complexes in PDMAA-co-PAPA via molecular recognition
Luo CH, Zuo F, Ding XB, Zheng ZH, Cheng X, Peng YX |
| 2126 - 2135 |
Preparation and properties of melt-processable polyimides based on fluorinated aromatic diamines and aromatic dianhydrides
Wang K, Fan L, Liu JG, Zhan MS, Yang SY |
| 2136 - 2141 |
Preparation of hydrogels composed of poly(vinyl alcohol) and polyethyleneimine and their electrical response
Shim JK, Oh SR, Lee SB, Cho KM |
| 2142 - 2149 |
Fabricating novel thermal crosslinked ultrafine fibers via electrospinning
Dai TH, Yu H, Zhang K, Zhu MF, Chen YM, Adler HJ |
| 2150 - 2158 |
Synthesis of microphase-separated poly(styrene-co-sodium styrene sulfonate) membranes using amphiphilic urethane acrylate nonionomers as an reactive compatibilizer
Kim JY, Mumi S, Lee CH, Lee YM, Ihn KJ |
| 2159 - 2164 |
Thermal and dynamic mechanical properties of organic-inorganic hybrid composites of itaconate-containing poly(butylene succinate) and methacrylate-substituted polysilsesquioxane
Sakuma T, Kumagai A, Teramoto N, Shibata M |
| 2165 - 2170 |
Activated carbon-polyethylenedioxythiophene composite electrodes for symmetrical supercapacitors
Selvakumar M, Bhat DK |
| 2171 - 2179 |
Study on PVC composites containing Eugenia jambolana wood flour
Saini G, Choudhary V, Bhardwaj R, Narula AK |
| 2180 - 2189 |
Polyurethanes with monodisperse rigid segments based on a diamine-diamide chain extender
Biemond GJE, Braspenning K, Gaymans RJ |
| 2190 - 2195 |
Potentiometric studies of oxidation-reduction reactions with redox copolymers
Bogoczek R, Kociolek-Balawejder E, Stanislawska E |
| 2196 - 2202 |
Thermal and rheological behavior of ultrafine fly ash filled LDPE composites
Hashmi SAR, Sharma P, Chand N |
| 2203 - 2210 |
Production of macroporous resins for heavy-metal removal. I. Nonfunctionalized polymers
Ortiz-Palacios J, Cardoso J, Manero O |
| 2211 - 2216 |
Enhanced mechanical properties of multilayer nano-coated electrospun nylon 6 fibers via a layer-by-layer self-assembly
Park JH, Kim BS, Yoo YC, Khil MS, Kim HY |
| 2217 - 2223 |
Mechanical properties of thermoplastic elastomeric blends of chitosan and natural rubber latex
Rao V, Johns J |
| 2224 - 2230 |
Performance studies of phosphate-doped polyaniline containing paint coating for corrosion protection of aluminium alloy
Sathiyanarayanan S, Azim S, Venkatachari G |
| 2231 - 2237 |
Consistent model predictions for isothermal cure kinetics investigation of high performance epoxy prepregs
Zhang J, Fox B, Guo QP |
| 2238 - 2245 |
Modification of polypropylene through intercrosslinking graft copolymerization of poly(vinyl alcohol): Synthesis and characterization
Kaur I, Gautam N, Khanna ND |
| 2246 - 2255 |
Improving mechanical performance of injection molded PLA by controlling crystallinity
Harris AM, Lee EC |
| 2256 - 2265 |
Development of a mathematical model for studying bioethanol-water separation using hydrophilic polyetherimide membrane
Alvarez MET, Moraes EB, Araujo WA, Maciel R, Wolf-Maciel MR |
| 2266 - 2273 |
The effects of dynamic vulcanization and compatibilizer on properties of paper sludge-filled polypropylene/ethylene propylene diene terpolymer composites
Salmah H, Ismail H, Abu Bakar A |
| 2274 - 2279 |
Effects of silica surface treatment on the impregnation process of silica fiber/phenolics composites
Liu L, Wang H, Wang BC, Huang YD |
| 2280 - 2288 |
New antimicrobial epoxy-resin-bearing Schiff-base metal complexes
Ahamad T, Nishat N |
| 2289 - 2294 |
Emulsion grafting of vinyl acetate onto preirradiated poly(3-hydroxybutyrate) film
Wada Y, Tamada M, Seko N, Mitomo H |
| 2295 - 2303 |
Composites of poly(2-chloroaniline) and poly(o-toluidine) with pumice and their application in the removal of Chromium(VI) ions from aqueous solutions
Gok AU, Gode F |
| 2304 - 2311 |
Poly(2,5-dimethoxyaniline) films on mild steel for application to glucose biosensor
Patil D, Patil P |
| 2312 - 2316 |
Dielectric relaxation of binary mixtures of alcohols with acrylic esters
Dharmalingam K, Ramachandran K, Sivagurunathan P, Undre BP, Khirade PW, Mehrotra SC |
| 2317 - 2321 |
Rheological behavior of polymer solutions during fabric coating
Zhao X, Stylios GK, Christie RM |
| 2322 - 2328 |
Conducting property of carbon black filled poly(ethylene glycol)/poly(methyl methacrylate) composites as gas-sensing materials
Dong XM, Luo Y, Xie LN, Zhang ST, Zhang YC, Zheng XL |
| 2329 - 2332 |
Removal of proteins from natural rubber with urea and its application to continuous processes
Yamamoto Y, Nghia PT, Klinklai W, Saito T, Kawahara S |
| 2333 - 2342 |
Preparation and adsorption properties of chitosan-poly(acrylic acid) nanoparticles for the removal of nickel ions
Wang JW, Kuo YM |
| 2343 - 2349 |
Physicochemical and biological evaluation of plasma-induced graft polymerization of acrylamide onto polydimethylsiloxane
Parvin A, Mirzadeh H, Khorasani MT |
| 2350 - 2355 |
Anomalous rheological behavior of polyethylene melts in the gross melt fracture reeime in the capillary extrusion: Effect of long-chain branching
Lee HY, Kim DH, Son Y |
| 2356 - 2363 |
Novel multimonomer-grafted polypropylene preparation and application in polypropylene/poly(vinyl chloride) blends
Hou LL, Zhao M, Liu HZ, Yang GS |
| 2364 - 2374 |
Microgel formation and thermo-mechanical properties of UV-curing unsaturated polyester acrylates
Nebioglu A, Soucek MD |
| 2375 - 2384 |
Self-reinforcing elastomer composites based on polyolefinic thermoplastic elastomer and thermotropic liquid crystalline polymer
Saikrasun S, Amornsakchai T |
| 2385 - 2393 |
The effect of matrix composition on the properties of cellulosic fibers-polyethylene composites
Katsoulotos G, Tarantili PA |
| 2394 - 2403 |
Characterization of aminated poly(ethylene terephthalate) surfaces for biomedical applications
Nissen KE, Stuart BH, Stevens MG, Baker AT |
| 2404 - 2413 |
Influence of reaction media on pressure sensitivity of polyanilines doped with DBSA
de Souza FG, Anzai TK, Melo PA, Soares BG, Nele M, Pinto JC |
| 2414 - 2435 |
Nonisothermal crystallization kinetics of polyamide 6 and ethylene-co-butyl acrylate blends
Balamurugan GP, Maiti SN |
| 2436 - 2443 |
Influence of compatibilizers on the rheological, mechanical and morphological properties of epoxidized natural rubber/polypropylene thermoplastic vulcanizates
Thitithammawong A, Noordermeer JWM, Kaesaman A, Nakason C |
| 2444 - 2452 |
Preparation of multinuclear microparticles using a polymerization in emulsion process
Salaun F, Devaux E, Bourbigot S, Rumeau P |
| 2453 - 2458 |
Dispersion polymerization of methyl methacrylate: Effect of stabilizer concentration
Jiang S, Sudol ED, Dimonie VL, El-Aasser MS |
| 2459 - 2465 |
The snthesis of block copolyetherketones based on 4,4'-dichlorodiphenylketone, phenolphthaleine, and bisphenol A and investigation of their properties
Ozden S, Charayev AM, Shaov AH, Bazheva RC |
| 2466 - 2474 |
Alkaline treatment of diacetate fibers and subsequent cellulase degradation
He JX, Tang YY, Wang SY |
| 2475 - 2479 |
Effects of nucleating agents on the porous structure of polyphenylene sulfide via thermally induced phase separation
Han XT, Ding HY, Wang LH, Xiao CF |
| 2480 - 2485 |
Photoluminescence analysis of Sm3+ and Dy3+ doped PVA films
Raju GSR, Buddhudu S |
| 2486 - 2493 |
Mechanical, dynamic mechanical, morphological, thermal behavior and processability of polyaniline and ethylene 1-octene based semi-conducting composites
Bhadra S, Singha NK, Khastgir D |
| 2494 - 2499 |
Atomic force microscopy analysis of morphology of low density polyethylene influenced by Al nano- and microparticles
Huang XY, Jiang PK, Kim CN, Duan JK, Wang GL |
| 2500 - 2508 |
Effect of poly(ethylene methyl acrylate) copolymer on thermal, morphological, and mechanical properties of polypropylene copolymer blown films
Gururajan G, Froude V, Riutta S, Thomas A, Gao I, Samuels SL, Massouda DF, Weinberg M, Ogale AA |
| 2509 - 2519 |
Cyclic ureas as solvents for esterification of poly(vinyl alcohol) and vinyl acetate-vinyl alcohol copolymers with acid chlorides
Fernandez MD, Fernandez MJ |
| 2520 - 2530 |
Comparative study on the effect of manchurian ash and larch wood flour on mechanical property, morphology, and rheology of HDPE/Wood flour composites
Li B, Jiang HL, Guo LH, Shi HC |
| 2531 - 2538 |
Effect of foaming temperature and rubber grades on properties of natural rubber foams
Ariff ZM, Zakaria Z, Tay LH, Lee SY |
| 2539 - 2544 |
Preparation and mechanical properties of acrylonitrile-butadiene-styrene copolymer/clay nanocomposites
Kim HS, Park BH, Choi JH, Yoon JS |
| 2545 - 2548 |
Preparation and conductivity of substituted Germanic heteropoly acids polyethylene glycol hybrid materials
Zhao SL, Wu QY, Huan XL, Zhao LC |
| 2549 - 2557 |
Synthesis of cyclodextrin-based polymers and their use as debittering agents
Binello A, Robaldo B, Barge A, Cavalli R, Cravotto G |
| 2558 - 2566 |
Conductive polymer composite materials and their utility in electromagnetic shielding applications
Fox RT, Wani V, Howard KE, Bogle A, Kempel L |
| 2567 - 2571 |
Synthesis of polysiloxanes with pendant methoxy-substituted aromatic fragments
Mukbaniani O, Titvinidze G, Dundua A, Doroshenko M, Tatrishvili T |
| 2572 - 2577 |
Modeling of the effect of rigid fillers on the stiffness of rubbers
Jha V, Hon AA, Thomas AG, Busfield JJC |
| 2578 - 2583 |
Synthesis and aqueous solution Behaviors of sodium sulfonate-terminated dendritic poly(ester-amine)
Xu DM, Zhao ZL, Wang AF, Zhang KD, Zhu XL |
| 2584 - 2587 |
Melt-state miscibility of poly(ethylene-co-1-octene) and linear polyethylene
Shin K, Nam BU, Bang J, Jho JY |
| 2588 - 2593 |
Molecular stability of chitosan in acid solutions stored at various conditions
Nguyen TTB, Hein S, Ng CH, Stevens WF |
| 2594 - 2599 |
Dopants dependent ion sensitivity of polypyrrole-modified electrode: Case of pH sensing
Pandey PC, Singh G |
| 2600 - 2606 |
Nonisothermal crystallization of polyamide 66/poly(phenvlene sulfide) blends
Zhang RC, Huang YG, Min M, Gao Y, Lu A, Lu ZY |
| 2607 - 2617 |
Hygrothermal ageing of an epoxy adhesive used in FRP strengthening of concrete
Yang QA, Xian GJ, Karbhari VM |
| 2618 - 2625 |
Water remaining properties of nonwoven fabrics treated with the polyurethane polymers containing carboxylic acid group and the thermal and structural characterization of the polymers
Suen MC, Lee HT, Chen HE, Chen CC |
| 2626 - 2631 |
Synthesis of a Magnesium/Aluminum/Iron layered double hydroxide and its flammability characteristics in halogen-free, flame-retardant Ethylene/Vinyl acetate copolymer composites
Jiao CM, Wang ZZ, Chen XL, Hu YA |
| 2632 - 2637 |
A positive-working photosensitive polyimide based on thermal cross-linking and acidolytic cleavage
Jung MS, Hyeon-Lee J, Choi TL |
| 2638 - 2645 |
Mechanism of silica reinforcement in CPE/NR blends by the use of rheological approaches
Phewphong P, Saeoui P, Sirisinha C |
| 2646 - 2650 |
Reverse atom transfer radical polymerization of acrylonitrile under microwave irradiation
Hou C, Qu RJ, Wang CH, Zhou WY, Liu L, Qi YX |
| 2651 - 2655 |
Copolymerization kinetics of poly(acrylonitrile-ran-2-ethenyl-pyridine) and its degradation apparent activation energy
Hou C, Qu RJ, Wang CH, Ji CN, Sun CM, Ying L |
| 2656 - 2664 |
Characterization of morphology in chemically modified styrene-b-(ethylene-co-butylene)-b-styrene by solid-state nuclear magnetic resonance
Collar EP, Garcia-Martinez JM, Garrido L |
| 2665 - 2670 |
Effect of mixing conditions on the rheological and optical properties of chemically modified poly(ethylene terephthalate-co-ethylene isophthalate)
Yamaguchi M, Wakabayashi T, Kanoh T |
| 2671 - 2680 |
The surface modification of nanosilica, preparation of nanosilica/acrylic core-shell composite latex, and its application in toughening PVC matrix
Guo YK, Wang MY, Zhang HQ, Liu GD, Zhang LQ, Qu XW |
| 2681 - 2688 |
Synthesis and properties of novel amphiphilic sulfated ionomers by the ring-opening reaction of an epoxidized styrene-butadiene-styrene triblock copolymer
Xie HQ, Zhao W, Yang W, Xie D |
| 2689 - 2694 |
Direct grafting of epsilon-caprolactone on solid core/mesoporous shell silica spheres by surface-initiated ring-opening polymerization
Moon JH, Ramaraj B, Lee SM, Yoon KR |
| 2695 - 2703 |
Thermo-viscoelastic behavior of PCNF-filled polypropylene nanocomposites
Frormann L, Iqbal A, Abdullah SA |
| 2704 - 2713 |
Ring-opening graft polymerization of L-lactide onto starch granules in an ionic liquid
Xu Q, Wang QR, Liu LJ |
| 2714 - 2722 |
Preconcentration and matrix elimination for the determination of Pb(II), Cd(II), Ni(II), and Co(II) by 8-hydroxyquinoline anchored poly(styrene-divinylbenzene) microbeads
Askun H, Gulbakan B, Celikbicak O, Uzun C, Guven G, Salih B |
| 2723 - 2731 |
Application of chitosan solutions gelled by melB tyrosinase to water-resistant adhesives
Yamada K, Aoki T, Ikeda N, Hirata M, Hata Y, Higashida K, Nakamura Y |
| 2732 - 2742 |
Effects of cononsolvency on preferential adsorption phenomenon in Poly(N-isopropylacrylamide) ternary solutions
Chen JH, Chen HH, Chang YX, Chuang PY, Hong PD |
| 2743 - 2743 |
Effects of ion group content and polyol molecular weight on physical properites of HTPB-based waterborne poly(urethane-urea)s (vol 105, pg 3794, 2007)
Chen TK, Huang SM |
