| 1915 - 1920 |
Vinyl-carbon nanotubes for composite polymer materials
Kang X, Ma W, Zhang HL, Xu ZG, Guo Y, Xiong YQ |
| 1921 - 1928 |
Effect of the origin of ZnO nanoparticles dispersed in polyimide films on their photoluminescence and thermal stability
Somwangthanaroj A, Phanthawonge C, Ando S, Tanthapanichakoon W |
| 1929 - 1937 |
Improving low-density polyethylene/poly(ethylene terephthalate) blends with graft copolymers
El-Nashar DE, Maziad NA, Sadek EM |
| 1938 - 1944 |
The behavior of dithiocarbimate derivative as safety accelerator of natural rubber compounds
Mariano RM, da Costa HM, Oliveira MRL, Rubinger MMM, Visconte LLY |
| 1945 - 1954 |
H-1 NMR, thermal, and conductivity studies on PVAc based gel polymer electrolytes
Baskaran R, Selvasekarapandian S, Kuwata N, Iwai Y, Kawamura J, Hattori T |
| 1955 - 1960 |
Fractal analysis of polypropylene composite filled with nano-calcium carbonate
Yuan S, Xu H, Gu H |
| 1961 - 1966 |
Investigation of dispersion states and rheological properties of SPI in the DMSO/urea
Xiao R, Yin D, Gu LX |
| 1967 - 1972 |
p-acetylbenzylidene triphenylarsonium ylide initiated radical polymerization of methyl acrylate
Tiwari SP, Gehlot CL, Srivastava AK |
| 1973 - 1978 |
Influence of polluted atmospheres on the natural aging of poly(vinyl chloride) stabilized with epoxidized sunflower oil
Gallouze N, Belhaneche-Bensemra N |
| 1979 - 1985 |
Mechanical and thermal properties of polypropylene/recycled polyethylene terephthalate/chopped rice husk composites
Ershad-Langroudi A, Jafarzadeh-Dogouri F, Razavi-Nouri M, Oromiehie A |
| 1986 - 1989 |
Properties of lignocellulose tamarind fruit fibers
Maheswari CU, Guduri BR, Rajulu AV |
| 1990 - 1996 |
Influence of an annealing treatment on the solid-state grafting of styrene onto spherical isotactic polypropylene granules
Deng QT, Fu ZS, Sun FL, Xu JT, Fan ZQ |
| 1997 - 2000 |
Investigating the spinnability in the dry-jet wet spinning of PAN precursor fiber
Tan LJ, Chen HF, Pan D, Pan N |
| 2001 - 2008 |
Simultaneous measurement of resistance and viscoelastic responses of carbon black-filled high-density polyethylene subjected to dynamic torsion
Zhou JF, Song YH, Shangguan YG, Zheng Q |
| 2009 - 2015 |
Synthesis and characterization of novel poly(arylenevinylene) derivative
Se-Yong S, Kang-Su K, Young-Bin L, Jin-Sung K, Kim EK, Yong-Kuk C, Kwon SK, Zhao QH, Jung WI, Kim JJ, Kim YH |
| 2016 - 2020 |
Synthesis and study of the oligo(ether-ester)s based on butylene oxide
Ahmetli G, Kocak A, Soydal U |
| 2021 - 2029 |
Porous versus novel compact Ziegler-Natta catalyst particles and their fragmentation during the early stages of bulk propylene polymerization
Vestberg T, Denifl P, Wilen CE |
| 2030 - 2040 |
Isothermal oxidation kinetics of unstabilized polypropylene in the molten state
Sarrabi S, Colin X, Tcharkhtchi A |
| 2041 - 2046 |
Ionic polymer-metal composites made from radiation grafted FEP-g-styrene-SO3H membranes
Rao SS, Ojha PK, Rath SK, Palla KB, Patri M |
| 2047 - 2057 |
Protein separation by cellulose acetate/sulfonated poly(ether imide) blend ultrafiltration membranes
Nagendran A, Mohan D |
| 2058 - 2062 |
Preparation and characterization of a novel series of amphiphilic phospholipids compounds
Yu H, Gu XH, Qi XL, Chen XY, Shen XY, Duan YR |
| 2063 - 2070 |
Electrospun nano-scaled glass fiber reinforcement of Bis-GMA/TEGDMA dental composites
Gao Y, Sagi S, Zhang LF, Liao YL, Cowles DM, Sun YY, Fong H |
| 2071 - 2077 |
Morphology and mechanical properties of catalytic coke/polypropylene composites
Muangmaithong K, Praserthdam P, Thongyai S, Wacharawichanant S |
| 2078 - 2084 |
Modeling the stress-relaxation behavior of wool fibers
Liu HL, Yu WD, Jin HB |
| 2085 - 2093 |
Synthesis and characterization of polyparaphertylene from cis-dihydrocatechol
Li S, Li ZB, Fang XB, Chen GQ, Huang YM, Xu KT |
| 2094 - 2101 |
Rheological and thermal properties of poly(ethylene oxide)/multiwall carbon nanotube composites
Abraham TN, Ratna D, Siengchin S, Karger-Kocsis J |
| 2102 - 2107 |
Behavior of flexible poly(vinyl chloride)/poly(hydroxybutyrate valerate) blends
Marcilla A, Garcia-Quesada JC, Gil E |
| 2108 - 2114 |
Organic-acid-catalyzed sol-gel route for preparing poly(methyl methacrylate)-silica hybrid materials
Yeh JM, Huang KY, Dai CF, Chand BG, Weng CJ |
| 2115 - 2126 |
Synthesis and characterization of new monomeric and polymeric phthalocyanines
Bilgin A, Yagci C, Mendi A, Yildiz U |
| 2127 - 2138 |
Microspheres of new alternating copolyesters derived from glycolic acid units for controlled drug release
Martinez-Palau M, Franco L, Puiggali J |
| 2139 - 2144 |
Effects of interfacial modification on the thermal, mechanical, and fire properties of high-impact polystyrene/microencapsulated red phosphorous
Chang SQ, Xie TX, Yang GS |
| 2145 - 2152 |
Preparation of microcapsules containing TMBA (1,3,5-trimethylbarbituric acid) by the drying-in-liquid method and its application
Fuchigami K, Taguchi Y, Tanaka M |
| 2153 - 2163 |
Modeling of multifilament PET fiber melt-spinning
Jeon YP, Cox CL |
| 2164 - 2167 |
Ultraviolet-curable epoxidized sunflower oil/organoclay nanocomposite coatings
Jiratumnukul N, Intarat R |
| 2168 - 2178 |
Synthesis, characterization, and degradation of a novel L-tyrosine-derived polycarbonate for potential biomaterial applications
Xia H, Suo ZY, Qiang GJ, Chang CJ |
| 2179 - 2183 |
Kinetics of Neutral Hydrolytic Depolymerization of PET (Polyethylene Terephthalate) Waste at Higher Temperature and Autogenious Pressures
Zope VS, Mishra S |
| 2184 - 2194 |
Online Near-Infrared Measurements of an Epoxy Cure Process Compared to Mathematical Modeling Based on Differential Scanning Calorimetry Measurements
Friis-Pedersen HH, Houmoller LP, Storm BK |
| 2195 - 2204 |
Poly(butylene terephthalate)/Clay Nanocomposite Compatibilized with Poly(ethylene-co-glycidyl methacrylate). I. Isothermal Crystallization
Huang JW |
| 2205 - 2210 |
Thermal Degradation Behavior of Poly(vinyl chloride) in the Presence of Poly(glycidyl methacrylate)
Sabaa MW, Farag ZR, Mohamed NA |
| 2211 - 2217 |
Synthesis, Characterization, and Evaluation of Copolymers Based on N-Isopropylacrylamide and 2-Ethoxyethyl Methacrylate for the Controlled Release of Felodipine
Shelke NB, Kumar SV, Mahadevan KM, Sherigara BS, Aminabhavi TM |
| 2218 - 2226 |
Mechanical Properties of Green Composites with Polycaprolactone and Wheat Gluten
Finkenstadt VL, Mohamed AA, Biresaw G, Willett JL |
| 2227 - 2233 |
Improvement of the Nafion-Polytetrafluoroethylene Membranes for Potential Direct Methanol Fuel Cell Use by Reduction of the Methanol Crossover
Tang HL, Pan M, Wan ZH |
| 2234 - 2242 |
The Studies on the Stimuli-Response of Poly (N,N-Dimethylamino Ethyl Methacrylate/Acrylic Acid-co-Acrylamide) Complex Hydrogel Under DC Electric Field
Zhao YB, Liu W, Yang XL, Xu HB |
| 2243 - 2252 |
Interaction of Gamma Radiation with PVA/PANi Composite Films: Structural and Morphological Studies
Bhat NV, Nate MM, Gore AV, Bhat RM |
| 2253 - 2260 |
Mechanical and Morphological Properties of Epoxy Resins Modified by Poly(phthalazinone ether sulfone ketone)
Xu YJ, Liao GX, Gu TS, Zheng L, Jian XG |
| 2261 - 2266 |
Grafting of Maleic Anhydride onto Polyethylene Through a Green Chemistry Approach
Shen YH, Qi RR, Liu QC, Wang YL, Mao YP, Yu J |
| 2267 - 2277 |
The Analysis and Design of a Both Open Ended Hollow Fiber Type RO Module
Fujiwara N, Matsuyama H |
| 2278 - 2292 |
A New, Nonphosgene Route to Poly(bisphenol A Carbonate) by Melt-Phase Interchange Reactions of Alkylene Diphenyl Dicarbonates with Bisphenol A
Sweileh BA, A-Hiari YM, Aiedeh KM |
| 2293 - 2304 |
Physicochemical Studies of Globular Proteins-Bovine Serum Albumin, Egg Albumin, and Lysozyme-in Some Aqueous Iodide Salts Solutions of IA Group and Cetyltrimethyl Ammonium Bromide Systems
Singh M |
| 2305 - 2314 |
Effect of Chemical Modifications on the Thermal Stability and Degradation of Banana Fiber and Banana Fiber-Reinforced Phenol Formaldehyde Composites
Joseph S, Sreekala MS, Thomas S |
| 2315 - 2320 |
Synthesis and characterization of novel polyurethanes based on N-1,N-4-bis[(4-hydroxyphenyl)methylene]succinohydrazide hard segment
Raghu AV, Gadaginamath GS, Priya M, Seema P, Jeong HM, Aminabhavi TM |
| 2321 - 2327 |
Adsorption for metal ions of chitosan coated cotton fiber
Zhang GY, Qu RJ, Sun CM, Ji CN, Chen H, Wang CH, Niu YZ |
| 2328 - 2336 |
Spectroscopic and Thermogravimetric Analysis of PANI/PPy Composite Polymer Electrode: Its Application to Electrochemical Investigation of Pharmaceutical Formulation
Tiwari DC, Jain R, Sharma S |
| 2337 - 2344 |
Preparation and Characterization of Tapioca Starch-Poly(lactic acid)-Cloisite NA(+) Nanocomposite Foams
Lee SY, Hanna MA |
| 2345 - 2351 |
Polymer/Carbon Nanotube Nanocomposites via Noncovalent Grafting with End-Functionalized Polymers
Lee SH, Park JS, Lim BK, Kim SO |
| 2352 - 2357 |
Formation of Silver Nanoparticles Created In Situ in an Amphiphilic Block Copolymer Film
Park JT, Koh JH, Lee KJ, Seo JA, Min BR, Kim JH |
| 2358 - 2365 |
Properties of a Poly(L-lactic acid)/Poly(D-lactic acid) Stereocomplex and the Stereocomplex Crosslinked with Triallyl Isocyanurate by Irradiation
Quynh TM, Mitomo H, Zhao L, Tamada M |
| 2366 - 2373 |
In Situ Encapsulation of Tetradecane Droplets in Oil-in-Water Emulsions Using Amino Resins
Sgraja M, Blomer J, Bertling J, Jansens PJ |
| 2374 - 2383 |
Effect of Organic Modifiers and Silicate Type on Filler Dispersion, Thermal, and Mechanical Properties of ABS-Clay Nanocomposites
Tiwari RR, Natarajan U |
| 2384 - 2392 |
Polyfluorene Copolymer with a Multiply Blocked Rotaxane Architecture in the Main Chain: Synthesis and Characterization
Farcas A, Jarroux N, Guegan P, Fifere A, Pinteala M, Harabagiu V |
| 2393 - 2398 |
Solubility of Alkanes in a Polystyrene Matrix
Bernardo G, Vesely D |
| 2399 - 2404 |
Solubility and Phase Separation of Poly(L,D-Lactide) Copolymers
Rissanen M, Puolakka A, Nousiainen P, Kellomaki M, Ella V |
| 2405 - 2412 |
Surface modification of starch nanocrystals through ring-opening polymerization of epsilon-caprolactone and investigation of their microstructures
Namazi H, Dadkhah A |
| 2413 - 2423 |
Flame retardancy and dielectric properties of dicyclopentadiene-based benzoxazine cured with a phosphorus-containing phenolic resin
Hwang HJ, Lin CY, Wang CS |
| 2424 - 2431 |
Synthesis, characterization, and thermal studies of polyamides and polyimides containing two silarylene units in the main chain
Tagle LH, Terraza CA, Leiva A, Devilat F |
| 2432 - 2439 |
Synthesis and characterization of heterotelechelic poly(ethylene glycol)s with amino acid at one end and hydroxyl group at another end
Zhang J, Su ZG, Ma GH |
| 2440 - 2445 |
Synthesis and characterization of a salt-resisting superabsorbent based on poly(acrylic acid) with sodium tungstate as a crosslinker
Liu CY, Zhang MJ, Zhu J, Ma SS |
| 2446 - 2452 |
Preparation of carmustine-loaded PLA ultrasmall-nanoparticles by adjusting micellar behavior of surfactants
Yan CH, Yuan XB, Kang CS, Zhao YH, Liu J, Guo YS, Lu J, Pu PY, Sheng J |
| 2453 - 2460 |
Novel superabsorbent cellulose-based hydrogels crosslinked with citric acid
Demitri C, Del Sole R, Scalera F, Sannino A, Vasapollo G, Maffezzoli A, Ambrosio L, Nicolais L |
| 2461 - 2466 |
Synthesis and trapping properties of dithiocarbamate macromolecule heavy-metal flocculants
Zheng HL, Sun XP, He Q, Liang K, Zhang P |
| 2467 - 2474 |
Stability studies on blends of a lactic acid-based hot melt adhesive and starch
Inkinen S, Stolt M, Sodergard A |
| 2475 - 2482 |
Preparation of a natural rubber core/polymer shell in a nanomatrix by graft copolymerization
Arayapranee W, Rempel GL |
| 2483 - 2487 |
Morphologies and mechanical properties of HDPE induced by small amount of high-molecular-weight polyolefin and shear stress produced by dynamic packing injection molding
Chen ZC, Lei J, Gao XQ, Deng C, Gao L, Shen KZ |
| 2488 - 2497 |
Encapsulation efficiency and release behaviors of bovine serum albumin loaded in alginate microspheres prepared by spraying
Zhang J, Li XH, Zhang DJ, Xiu ZL |
| 2498 - 2503 |
Synthesis and magnetic properties of novel fully conjugated polymeric complexes containing 1,10-phenanthroline
Zheng RH, Jiang HJ, Sun WL, Yang J |
| 2504 - 2515 |
Phthalonitrile-epoxy blends: Cure behavior and copolymer properties
Dominguez DD, Keller TM |
| 2516 - 2524 |
Influence of climatic ageing on the mechanical properties and the microstructure of low-density polyethylene films
Chabira SF, Sebaa M, G'sell C |
| 2525 - 2530 |
Fabrication and characterization of a novel polypropylene/poly(vinyl alcohol)/aluminum hybrid layered assembly for high-performance fibrous insulation
Wu HJ, Fan JT, Qin XH, Mo S, Hinestroza JP |
