| 3415 - 3424 |
Carrier-bound methotrexate. II. Water-soluble polyaspartamide methotrexate conjugates with amide links in polymer-drug spacer
Caldwell G, Meirim MG, N'Da DD, Neuse EW |
| 3425 - 3432 |
Synthesis, characterization, and antitumor activity of poly(maleic anhydride-co-vinyl acetate-co-acrylic acid)
Can HK, Dogan AL, Rzaev ZMO, Uner AH, Guner A |
| 3433 - 3438 |
Core/shell SiOx@PAM nanospheres from UV-assisted surface-initiated free radical polymerization
Liu P, Zhang LX, Su ZX |
| 3439 - 3445 |
Preparation and characterization of ceria nanoparticles supported on poly(4-vinyl pyridine-co-divinyl benzene)
Sivudu KS, Shailaja D |
| 3446 - 3453 |
Calorimetric studies of PP/Mater-Bi blends aged in soil
Cadenato A, Ramis X, Salla JM, Morancho JM, Contat-Rodrigo L, Valles-Lluch A, Ribes-Greus A |
| 3454 - 3464 |
Evolutions of microstructure and dielectric behavior of epoxy based insulator-insulator composites over long periods of time
Vouyovitch L, Flandin L, Bessede JL, Alberola ND |
| 3465 - 3473 |
The effect of shear forces on the microstructure and mechanical properties of epoxy-clay nanocomposites
Oh TK, Hassan M, Beatty C, El-Shall H |
| 3474 - 3482 |
Proton conducting blends based on polysulfones and elastomers
Linares A, Acosta JL, Rodriguez S |
| 3483 - 3489 |
Novel nitrogen-containing epoxy resin. II. Cure kinetics by differential scanning calorimetry
Zhang XH, Min YQ, Zhao H, Wan HM, Qi GR |
| 3490 - 3497 |
Interactions of active carbon with low- and high-molecular weight polyethylene glycol and polyethylene oxide
Bar-Chaput S, Carrot C |
| 3498 - 3509 |
Synchronous toughening and reinforcing of polypropylene with ultrahigh-molecular-weight polyethylene via melt blending: Mechanical properties, morphology, and rheology
Wang XD, Li HQ, Jin RG |
| 3510 - 3518 |
Surface modification on nanoscale titanium dioxide by radiation: Preparation and characterization
Jiang B, Zu XT, Tang FY, Wu ZH, Lu J, Wei QR, Zhang XD |
| 3519 - 3530 |
Microstructural and mold resistant properties of environment-friendly oil-modified polyurethane based wood-finish products containing polymerized whey proteins
Wright NC, Li JC, Guo MR |
| 3531 - 3535 |
Some monomer reactivity ratios of styrene and (meth)acrylates in the presence of TEMPO
Huang JY, Chu JY, Zhuang JM, Chen YH, Dai LZ, Zou YS |
| 3536 - 3544 |
Epoxy-tert-butyl poly(cyanoarylene ether) blends: Phase morphology, fracture toughness, and mechanical properties
Saxena A, Francis B, Rao VL, Ninan KN |
| 3545 - 3553 |
Mechanical properties, stress-relaxation, and orientation of double bubble biaxially oriented polyethylene films
Bobovitch AL, Tkach R, Ajji A, Elkoun S, Nir Y, Unigovski Y, Gutman EM |
| 3554 - 3561 |
Possibilities of collagen adsorption on some polymeric matrices based on styrene copolymers
Nita LE, Chiriac AP, Vasile C |
| 3562 - 3573 |
Oxidative copolymerization between toluidine and vinyl acetate
Li XG, Dong ZQ, Huang MR, Shao HL, Hu XC |
| 3574 - 3578 |
Thermal stability of polypropylene/carbon nanofiber composite
Chatterjee A, Deopura BL |
| 3579 - 3588 |
Fluorinated-plasma modification of polyetherimide films
Kaba M, Essamri A, Mas A, Schue F, George GA, Cardona F, Rintoul L, Wood BJ |
| 3589 - 3595 |
Synthesis and characterization of radiation grafted copolymer for removal of nonionic organic contaminants
Sokker HH, Ghaffar AMA, Nada AMA |
| 3596 - 3601 |
The influence of alkali pretreatments in lyocell resin finishing-resin distribution and mechanical properties
Manian AP, Abu Rous M, Schuster KC, Bechtold T |
| 3602 - 3608 |
Preparation and characterization of novel cationic copolymer hydrogels with pH sensitivity and thermo sensitivity
Guo JT, Li L, Li XY, Zhu JL |
| 3609 - 3614 |
Microstructure and wear properties of plasma-sprayed aluminum-silicon-polyester coatings
Oksuz M, Yildirim H, Erturan S |
| 3615 - 3618 |
Synthesis and characterization of p-perfluoro{1-[2-(2-fluorosulfonyl-ethoxy)propoxyl]}ethylated poly(alpha-methyl styrene)
Ni HB, Yang JC, Zhao CX |
| 3619 - 3625 |
Effect of water absorption, freezing and thawing, and photo-aging on flexural properties of extruded HDPE/rice husk composites
Panthapulakkal S, Law S, Sain M |
| 3626 - 3633 |
Preparation of copolymer of L-aspartic acid and L-glutamic acid
Zhang R, Tan TW |
| 3634 - 3640 |
Electrochemistry of methanofullerene films: Simultaneous cyclic voltammetry and electrochemical quartz crystal microbalance studies
Zhang H, Huang X, Fan LZ, Nin B, Wu YQ, Zheng LP, Cao Y |
| 3641 - 3645 |
Mechanical properties of composites from sawdust and recycled plastics
Najafi SK, Hamidinia E, Tajvidi M |
| 3646 - 3652 |
Rheological properties of high melt strength poly(ethylene terephthalate) formed by reactive extrusion
Forsythe JS, Cheah K, Nisbet DR, Gupta RK, Lau A, Donovan AR, O'Shea MS, Moad G |
| 3653 - 3661 |
Preparation and properties of nanocomposite hydrogels containing silver nanoparticles by ex situ polymerization
Lee WF, Tsao KT |
| 3662 - 3672 |
Graft copolymers and high-molecular-weight star-like polymers by atom transfer radical polymerization
Masar B, Janata M, Latalova P, Netopilik M, Vlcek P, Toman L |
| 3673 - 3679 |
The morphology and property of ultra-fine full-vulcanized acrylonitrile butadiene rubber particles/EPDM blends
Zhang LQ, Li T, Lu YL, Tang YW, Qiao JL, Tian M |
| 3680 - 3695 |
Alternatives for multiobjective optimization of a polymerization process
Curteanu S, Leon F, Galea D |
| 3696 - 3706 |
Compatibility of HDPE/postconsumer HDPE blends using compatibilizing agents
Ramirez-Vargas E, Sandoval-Arellano Z, Hernandez-Valdez JS, Martinez-Colunga JG, Sanchez-Valdes S |
| 3707 - 3712 |
Effect of modified carbon black on the filler-elastomer interaction and dynamic mechanical properties of SBR vulcanizates
Han JJ, Zhang XL, Guo WH, Wu CF |
| 3713 - 3717 |
Multicarboxylic aromatic acid core initiator for the synthesis of star-shaped poly(epsilon-caprolactone) with carboxyl end groups
Jia ZF, Huang JL |
| 3718 - 3726 |
Emulsifier-free synthesis and self-assembly of an amphiphilic poly(styrene-co-acrylic acid) copolymer
Yan LF, Zhang GZ, Liu GM, Ji J, Li W |
| 3727 - 3732 |
Studies of the mechanical and thermal properties of cross-linked poly(methylmethacrylate-acrylic acid-allylmethacrylate)-modified bone cement
Nien YH, Chen J |
| 3733 - 3740 |
Effects of additives with different functional groups on the physical properties of starch/PVA blend film
Yoon SD, Chough SH, Park HR |
| 3741 - 3747 |
Single-pack, self-curable, aqueous-based polyurethane dispersion containing a disperse dye
Huang CT, Chen KN |
| 3748 - 3755 |
Polyesters from renewable resources: preparation and characterization
Balkare IO, Pavithran C, Okieimen FE, Pillai CKS |
| 3756 - 3760 |
The measurement of thermal diffusivity in poly(methyl acrylate) by photoacoustic technique
Rajan MAJ, Mathavan T, Vivekanandam TS, Umapathy S |
| 3761 - 3764 |
A theoretical description of the oxidation kinetics of polymer melt in fractal mediums
Kozlov GV, Dolbin IV, Zaikov GE |
| 3765 - 3768 |
A structural model of an accessibility of polycarbonate melt to thermooxidative degradation processes
Kozlov GV, Dolbin IV, Zaikov GE |
| 3769 - 3777 |
Preparation and properties of some thermosets derived from allyl-functional naphthoxazines
Agag T |
| 3778 - 3783 |
Effects of activation temperature on the properties and structure of PAN-based activated carbon hollow fiber
Sun J, Wang QR |
| 3784 - 3788 |
Photoluminescent carbon nanocapsule/polycyanate composites with hydrogen bond interactions
Su FK, Hong JL, Liao GF, Lin LL, Hwang GL, Day TC |
| 3789 - 3793 |
Study of poly(vinyl chloride) interfaces using slow positron beams
Mostafa N |
| 3794 - 3800 |
Crystallization behavior of carbon nanotubes-filled polyamide 1010
Wang B, Sun GP, Liu JJ, He XF, Li J |
| 3801 - 3808 |
Synthesis of monodisperse nickel-coated polymer particles by electroless plating method utilizing functional polymeric ligands
Jun JB, Seo MS, Cho SH, Park JG, Ryu JH, Dosuh K |
| 3809 - 3815 |
Thermooxidative degradation of natural rubber/clay composite
Chen M, Ao NJ, Liao YY, Chen Y, Zhou HL |
| 3816 - 3821 |
Spinline tension control in melt spinning by discrete adaptive sliding-mode controllers
Huang CC, Tang TT |
| 3822 - 3827 |
Reactivity ratios of acrylamide-vinyl pyrrolidone copolymerization system obtained by sequential sampling
Akyuz A, Paril A, Giz A |
| 3828 - 3831 |
Fractal model of the heat conductivity for carbon fiber-reinforced aromatic polyamide
Kozlov GV, Burya AI, Dolbin IV, Zaikov GE |
| 3832 - 3839 |
Nanostructure development in wet amorphous amylopectin as revealed by in situ X-ray scattering methods
Bayer RK, Balta-Calleja FJ |
| 3840 - 3849 |
Miscibility and transesterification in ternary blends of poly(ethylene naphthalate)/poly(pentamethylene terephthalate)/poly(ether imide)
Su CC, Shih CK |
| 3850 - 3854 |
Synthesis of solid epoxy resins base on BPCII and bisphenol A using conventional heating equipment and microwave
Brzozowski ZK, Staszczak SK, Hadam LK, Rupinski S, Bogdal D, Gorczyk J |
| 3855 - 3859 |
Biodegradability of diethylene glycol terephthalate and poly(ethylene terephthalate) fiber by crude enzymes extracted from activated sludge
Zhang JF, Gong JX, Shao GQ, Qin JJ, Gu ZY |
| 3860 - 3876 |
Effect of screw axial vibration on polymer melting process in single-screw extruders
Qu JP, Zeng GS, Feng YH, Jin G, He HZ, Cao XW |
| 3877 - 3888 |
Influence of premade and in situ compatibilizers in polypropylene/ethylene-propylene-diene terpolymer thermoplastic elastomeric olefins and thermoplastic vulcanizates
Naskar K, Noordermeer JWM |
| 3889 - 3894 |
Preparation and XPS surface chemical analysis of PS/PU nanocomposites
Zhu Y, Zhang LM, Zheng H, Sun DX |
| 3895 - 3903 |
Relationship between the network morphology and properties of commercial vinyl ester resins
Rodriguez E, Larranaga M, Mondragon I, Vazquez A |
| 3904 - 3912 |
Ternary blends of acrylic rubber, poly(butylene terephthalate), and liquid crystalline polymer: Influence of interactions on thermal and dynamic mechanical properties
Kumar ES, Yadaw SB, Pandey KN, Das CK |
| 3913 - 3918 |
Preparation of nano- and microparticles through self-assembly of azobenzene-pendent ionomers
Mori T, Yuyama K, Narita K, Minagawa K, Haraguchi M, Tanaka M |
| 3919 - 3925 |
Studies of the curing kinetics and thermal stability of epoxy resins using a mixture of amines and anhydrides
Jain R, Kukreja P, Narula AK, Chaudhary V |
| 3926 - 3930 |
Thermal properties of poly(maleic anhydride-alt-acrylic acid) in the presence of certain metal chlorides
Kavlak S, Can HK, Rzaev ZMO, Guner A |
| 3931 - 3942 |
High density polyethylene/ultra high molecular weight polyethylene blend. II. Effect of hydroxyapatite on processing, thermal, and mechanical properties
Lim KLK, Ishak ZAM, Ishiaku US, Fuad AMY, Yusof AH, Czigany T, Pukanzsky B, Ogunniyi DS |
| 3943 - 3947 |
Bond strength and durabilty behavior of polyurethane-based Desmodur-VTKA adhesives used for building materials after being exposed to water-resistance test
Uysal B, Ozcifci A |
| 3948 - 3955 |
Oil resistance and physical properties of in situ epoxidized natural rubber from high ammonia concentrated latex
Chuayjuljit S, Yaowsang C, Na-Ranong N, Potiyaraj P |
| 3956 - 3965 |
Thermal and viscoelastic properties of sequentially polymerized networks composed of benzoxazine, epoxy, and phenalkamine curing agents
Rao BS, Pathak SK |
| 3966 - 3973 |
Treatment of polluted water resources using reactive polymeric hydrogel
Shawky HA, El-Sayed MH, Ali AE, Mottaleb MSA |
| 3974 - 3980 |
Siloxane surfactant-modified clay and its effect in reinforcing the laminate of polymethylsilsesquioxane
Li BY, Ma J, Liu HY, Guo XL, Zhang XL, Xu J |
| 3981 - 3986 |
Naturally occurring amino acid: Novel curatives for chloroprene rubber
Das A, Naskar N, Datta RN, Bose PP, Debnath SC |
| 3987 - 3996 |
Superparamagnetic thermoresponsive composite latex via W/O miniemulsion polymerization
Lin CL, Chiu WY, Don TM |
| 3997 - 4003 |
Photocatalytic degradation of poly(ethylene oxide) and polyacrylamide
Vijayalakshmi SP, Madras G |
| 4004 - 4011 |
Study on morphology, crystallization behaviors of highly filled maleated polyethylene-layered silicate nanocomposites
Xie YC, Yu DM, Kong J, Fan XD, Qiao WQ |
| 4012 - 4022 |
Morphology and fracture properties of modified bisphenol A and novolac type vinyl ester resins
Karger-Kocsis J, Gryshchuk O |
| 4023 - 4044 |
Electrochemical behaviors of polyaniline-poly(styrenesulfonic acid) complexes and related films
Lin DS, Chou CT, Chen YW, Kuo KT, Yang SM |
| 4045 - 4051 |
Toughening of thermosets by the creation of residual compressive stresses
Kim HS, Kim NH |
| 4052 - 4058 |
Cellulose acetate reverse osmosis membranes: Optimization of the composition
Duarte AP, Cidade MT, Bordado JC |
| 4059 - 4065 |
Conductive epoxy/amine system containing polyaniline doped with dodecylbenzenesulfonic acid
Moreira VX, Garcia FG, Soares BG |
| 4066 - 4073 |
Polyesterimide resins with built-in polycyclic compounds
Wardzinska E, Penczek P |
| 4074 - 4081 |
Mica reinforced nylon-6: Effect of coupling agents on mechanical, thermal, and dielectric properties
Bose S, Raghu H, Mahanwar PA |
| 4082 - 4088 |
In vivo aging of gutta-percha dental cone
Silva JBA, de Paula RCM, Feitosa JPA, Gurgel ED, Maniglia-Ferreira C, de Souza FJ |
| 4089 - 4097 |
pH- and temperature-sensitive microfiltration membranes from blends of poly(vinylidene fluoride)-graft-poly(4vinylpyridine) and poly(N-isopropylacrylamide)
Zhai GQ |
| 4098 - 4106 |
Thermodynamic and sorption behavior of U(VI) and Th(IV) on unsaturated polyester-styrene polymeric beads
El-Gammal B, Ibrahim GM, El-Nahas HH |
| 4107 - 4113 |
Fourier transform infrared study of polypyrrole-poly(vinyl alcohol) conducting polymer composite films: Evidence of film formation and characterization
Mahmud HNME, Kassim A, Zainal Z, Yunus WMM |
| 4114 - 4119 |
Study on effective storage time of raw natural rubber
Zhang BL, Deng WY, Lu HX, Chen M, Qian HL |
| 4120 - 4126 |
Thermogelation hydrogels of methylcellulose and glycerol-methylcellulose systems
Kuang QL, Cheng GX, Zhao J, Li YJ |
| 4127 - 4132 |
Dynamic viscoelasticity of low-density polyethylene/in-situ-grafted carbon black composite
Wu G, Zheng Q, Zhang MQ, Hou YH |
| 4133 - 4141 |
Magnetic composites obtainment based on styrene polymers
Nita LE, Chiriac AP, Neamtu I, Vasile C |
| 4142 - 4154 |
Effect of gamma-aminopropyl trimethoxy silane on the performance of jute-polycarbonate composites
Khan MA, Hassan MM |
| 4155 - 4162 |
Surface modification of natural substrates by atom transfer radical polymerization
Lindqvist J, Malmstrom E |
| 4163 - 4172 |
Synthesis and thermally responsive properties of novel pluronic F87/polycaprolactone (PCL) block copolymers with short PCL blocks
Xiong XY, Tam KC, Gan LH |
| 4173 - 4180 |
Thermal and mechanical properties of polypropylene-wood powder composites
Salemane MG, Luyt AS |
| 4181 - 4189 |
Finite difference solution for a transient temperature distribution in an advanced polymer fiber
Sadooghi P, Aghanajafi C |
| 4190 - 4196 |
Effect of nanosize CaSO4 and Ca-3(PO4)(2) particles on the rheological behavior of polypropylene and its simulation with a mathematical model
Mishra S, Sonawane S, Mukherji A, Mruthyunjaya HC |
| 4197 - 4207 |
Dyeing mechanism and model of nylon 6 fiber dyeing in low-temperature hydrogen peroxide-glyoxal redox system
Wang HH, Wang CC |
| 4208 - 4211 |
Physical chemistry of topological disorder in polymers: Some remarks on polymer memory
Shlyapnikov YA, Kolesnikova NN |
| 4212 - 4218 |
Study on the prediction technique of the wear amount of polyoxymethylene
Kada M, Ishikawa M |
| 4219 - 4233 |
Hydrogenation of synthetic cis-1,4-polyisoprene and natural rubber catalyzed by [Ir(COD)py(PCy3)]PF6
Hinchiranan N, Charmondusit K, Prasassarakich P, Rempel GL |
| 4234 - 4239 |
Synthesis and mesomorphic properties of a new side-chain, chiral smectic, liquid-crystalline elastomer
Hu JS, Zhang BY, Zhou AJ, Du BG, Yang LQ |
| 4240 - 4246 |
A novel positive-type photosensitive polyimide based on soluble block copolyimide showing low dielectric constant with a low-temperature curing process
Jin XZ, Ishii H |
| 4247 - 4251 |
Graft copolymerization of styrene onto casein initiated by potassium diperiodatonickelate (IV) in alkaline medium
Liu YH, Zhou WQ, Bai LB, Zhao N, Liu YW |
| 4252 - 4259 |
Catalytic potential of a poly(AAc-co-HPMA-cl MBAm)-matrix-immobilized lipase from a thermotolerant Pseudomonas aeruginosa MTCC-4713
Kanwar SS, Verma HK, Kaushal RK, Gupta R, Kumar Y, Chimni SS, Chauhan GS |
| 4260 - 4264 |
Preparation and characterization of Bombyx mori silk fibroin and wool keratin
Iridag Y, Kazanci M |
| 4265 - 4269 |
Fe(2-EHA)(3)/Al(i-Bu)(3)/hydrogen phosphite catalyst for preparing syndiotactic 1,2-polybutadiene
Lu J, Hu YM, Zhang X, Bi JF, Dong WM, Jiang LS, Huang BT |
| 4270 - 4270 |
Polymers, composites, and characterization of conducting polyfuran and poly(2-bromoaniline) (vol 98, pg 2048, 2005)
Gok A, Sari B, Talu M |
| 4271 - 4271 |
Study on the spin probe-added polymeric dense membranes by C-13 solid-state nuclear magnetic resonance spectroscopy (vol 99, pg 3062, 2006)
Rana D, Matsuura T, Khulbe KC, Feng C |
