1 - 21 |
Some Physicochemical Aspects of Hydroxylapatite Narasaraju TS, Phebe DE |
22 - 30 |
The Effect of Laser-Surface Nitriding with a Spinning Laser-Beam on the Wear-Resistance of Commercial Purity Titanium Xin H, Mridha S, Baker TN |
31 - 37 |
Low-Temperature Iron Thin-Film Silicon Reactions Baldwin NR, Ivey DG |
38 - 42 |
Synthesis in-Situ of Nanosize Silver Sulfide Semiconductor Particles in Reverse Micelles Motte L, Billoudet F, Pileni MP |
43 - 48 |
Fluxing of a 359/SiC/10P Composite with Alkali Chlorides - Effect of Inclusions Samuel FH, Liu H |
49 - 53 |
Copper(II) Oxide as a Morphology Directing Agent in the Hydrothermal Crystallization of Magnetite Mcgarvey GB, Owen DG |
54 - 60 |
Attack of YBa2Cu3O6.8 by Acidic Aqueous-Solutions Candal RJ, Blesa MA, Regazzoni AE |
61 - 70 |
Analysis of Elastic Fiber Bridging in the Multiple Cracked Composite Kullaa J |
71 - 79 |
Low-Temperature Synthesized Aluminosilicate Glasses .1. Low-Temperature Reaction Stoichiometry and Structure of a Model-Compound Rahier H, Vanmele B, Biesemans M, Wastiels J, Wu X |
80 - 85 |
Low-Temperature Synthesized Aluminosilicate Glasses .2. Rheological Transformations During Low-Temperature Cure and High-Temperature Properties of a Model-Compound Rahier H, Vanmele B, Wastiels J |
86 - 89 |
Effect of Specimen Thickness on the Thermal-Diffusivity of (Sr,K)Zr-4(PO4)(6) Ceramic via a Laser-Flash Technique Liu DM |
90 - 94 |
The Effects of Additives on the Properties and Structure of Hot-Pressed Aluminum Titanate Ceramics Zhien L, Qingmin Z, Jianjun Y |
95 - 101 |
Compatibilizing Ppe and Pa6 with Nitro-Phthalimide Derivatives Ghidoni D, Bencini E, Nocci R |
102 - 118 |
Evaluation and Extension of Physical Property-Porosity Models Based on Minimum Solid Area Rice RW |
119 - 127 |
Dissolution of Brass-70/30 (Cu/Zn) and Its Inhibition During the Acid Wash in Distillers Elwarraky AA |
128 - 131 |
Epitaxial and Graphoepitaxial Growth of Materials on Highly Orientated PTFE Substrates Fenwick D, Smith P, Wittmann JC |
132 - 136 |
Study of the Structure of As0.3Se0.2S0.4Ge0.1 Chalcogenide Glass Using the Radial-Distribution Function Afify N, Gaber A, Talaat HM, Abdalla I |
137 - 143 |
Quantitative Phase-Analysis of Metastable Structure in a Laser Melted Fe-C Alloy .1. Structural-Analysis of Single Melted Tracks by SEM and TEM Zarubova N, Wolf P, Cermak J, Cernansky M |
144 - 149 |
Contact Capacitance Effect in Measurement of AC-Impedance Spectra for Hydrating Cement Systems Xie P, Gu P, Beaudoin JJ |
150 - 156 |
Silicon-Nitride Ceramics with Celsian as an Additive Hwang CJ, Newman RA |
157 - 163 |
Liquid-Phase Behavior in Nonstoichiometric Calcium-Doped Lanthanum Chromites Carter JD, Nasrallah MM, Anderson HU |
164 - 171 |
An Investigation of the Microstructure and Mechanical-Properties of the Macro-Interface in Selectively Reinforced Aluminum Castings Oconnor MJ, Wawner FE, Jones CC |
172 - 184 |
Crystal-Growth Kinetics in Baoal(2)O(3)2Sio(2) and Sroal(2)O(3)2Sio(2) Glasses Hyatt MJ, Bansal NP |
185 - 191 |
Investigation of Microstructure of Molybdenum-Copper Black Electrodeposited Coatings with Reference to Solar Selectivity Yousif KM, Smith BE, Jeynes C |
192 - 198 |
Soft-X-Ray Image Storage in Poly (Methyl-Methacrylate) Shinozaki DM, Cheng PC |
199 - 203 |
Influence of Resin Content on the Sorption Properties of Adsorbents Produced from Novolac-Biomass Composites Faliagas A, Sfyrakis J, Simitzis J |
204 - 208 |
Formation and Sintering of 75 Mol-Percent Alumina 25 Mol-Percent Zirconia (2-3.5 Mol-Percent Yttria) Composite Powder Prepared by the Hydrazine Method Goto K, Hirota K, Yamaguchi O, Kume H, Inamura S, Miyamoto H |
209 - 213 |
Research in Real-Time of Some Thermal and Mass Growth-Parameters of BGO and BSO Crystals During the Czochralski Process with Weight Diameter Control Tassev VL |
214 - 223 |
Tensile Fracture Characteristics of Double Convex-Faced Cylindrical Powder Compacts Essaheb MH |
224 - 231 |
A High-Resolution Electron-Microscopic Study of the Microstructure in Rapidly Solidified Al-Li-Cu-Mg-Zr Alloys Zhang LC, He AO, Ye HO, Zhang YC |
232 - 241 |
Damage Characterization of 2-Dimensional Woven and 3-Dimensional Braided SiC-SiC Composites Pluvinage P, Parvizimajidi A, Chou TW |
242 - 245 |
Investigation of Dynamic Youngs Modulus for Molybdenum Disilicide-Titanium Trisilicide (Mosi(2)-Ti5Si3) Wolfenden A, Bauer KJ, Petrovic JJ |
246 - 251 |
Melt-Spinning as a Microstructural Analog for Aluminide Diffusion Coating Gale WF, Nemani RV, Schumacher P |
252 - 261 |
Dynamic Consolidation Hot Isostatic Pressing of SiC Shang SS, Meyers MA |
262 - 266 |
Porosity-Dependence of Elastic Properties and Ultrasonic Velocity in Polycrystalline Alumina - A Model-Based on Cylindrical Pores Phani KK |
267 - 271 |
Sol-Gel Preparation, Structure and Thermal-Stability of Crystalline Zirconium Titanate Microspheres Bhattacharya AK, Mallick KK, Hartridge A, Woodhead JL |
272 - 279 |
Porosity-Dependence of Ultrasonic Velocity in Sintered Materials - A Model-Based on the Self-Consistent Spheroidal Inclusion Theory Phani KK |