| 4211 - 4218 |
Applications of electron backscatter diffraction to materials science: status in 2009
Randle V |
| 4219 - 4227 |
Effects of the wrinkled fabric preform on the bending properties of resin transfer molded composites
Do TT, Lee DJ |
| 4228 - 4234 |
Stress corrosion cracking of 2205 duplex stainless steel in H2S-CO2 environment
Liu ZY, Dong CF, Li XG, Zhi Q, Cheng YF |
| 4235 - 4240 |
Graphitization behavior of iodine-treated Bombyx mori silk fibroin fiber
Khan MMR, Gotoh Y, Morikawa H, Miura M |
| 4241 - 4245 |
Influence of annealing on rheological and conductive behaviors of high-density polyethylene/carbon black composites
Cao Q, Song YH, Liu ZH, Zheng Q |
| 4246 - 4251 |
Sterically hindered phthalocyanines: solution-phase interactions with carbon monoxide
Alarjah M, Paniwnyk L, Peterson IR, Lorimer JP, Walton DJ |
| 4252 - 4257 |
Energy-efficient green synthesis of Nd:Y2O3 nanopowder by microwave gel combustion
Rekha M, Laishram K, Gupta RK, Malhan N, Satsangi AK |
| 4258 - 4263 |
Study on Ti fiber reinforced TiAl3 composite by infiltration-in situ reaction
Liu YM, Xiu ZY, Wu GH, Yang WS, Chen GQ, Gou HS |
| 4264 - 4269 |
Tensile deformation of a Mg-2.54Nd-0.26Zn-0.32Zr alloy at elevated temperature
Ning ZL, Wang GJ, Cao FY, Sun JF, Du JF |
| 4270 - 4278 |
Free-volume properties and toughening behavior of cyanate ester resin/carboxyl-randomized liquid butadiene-acrylonitrile rubber composites
Zeng MF, Sun XD, Yao XD, Wang Y, Zhang MZ, Wang BY, Qi CZ |
| 4279 - 4285 |
The effect of skin characteristics on the environmental behavior of die cast AZ91 magnesium alloy
Aghion E, Lulu N |
| 4286 - 4295 |
Control of morphology in inert-gas condensation of metal oxide nanoparticles
Gordon WO, Morris JR, Tissue BM |
| 4296 - 4302 |
Novel sintered glass-ceramics from vitrified oil well drill cuttings
Abbe OE, Grimes SM, Fowler GD, Boccaccini AR |
| 4303 - 4307 |
Microstructure and mechanical properties of graphite fiber-reinforced high-purity aluminum matrix composite
Wang X, Chen GQ, Li B, Wu GH, Jiang DM |
| 4308 - 4314 |
Fracture characteristics of high impact polystyrene under impact fatigue loadings
Yilmaz T, Sahin T, Sinmazcelik T |
| 4315 - 4320 |
Effect of heat-treatment on CdS and CdS/ZnS nanoparticles
Park K, Yu HJ, Chung WK, Kim BJ, Kim SH |
| 4321 - 4325 |
Ferroelectric properties of (1-x)Bi(Zn1/2Ti1/2)O-3-xPbZrO(3) ceramics
Khamman O, Tan X, Ananta S, Yimnirun R |
| 4326 - 4333 |
Development of sensors based on CuO-doped SnO2 hollow spheres for ppb level H2S gas sensing
He LF, Jia Y, Meng FL, Li MQ, Liu JH |
| 4334 - 4341 |
Studies on the mechanism of the structural evolution in Cu-Al-Ni elemental powder mixture during high energy ball milling
Vajpai SK, Dube RK, Sharma M |
| 4342 - 4347 |
Study of dilute Al-Cu solidification by cooling curve analysis
Fornaro O, Palacio HA |
| 4348 - 4353 |
Effect of annealing parameters on the magnetic properties of NiZn ferrite thin films
Sun K, Lan ZW, Yu Z, Nie XL, Li LZ, Zhao XN |
| 4354 - 4359 |
Phase transition characteristics and electrical properties of nitrogen-doped GeSb thin films for PRAM applications
Lee SY, Kim HK, Kim JH, Roh JS, Choi DJ |
| 4360 - 4369 |
Synthesis and characterization of WO3 and WS2 hexagonal phase nanostructures and catalytic test in sulfur remotion
Huirache-Acuna R, Paraguay-Delgado F, Albiter MA, Alvarez-Contreras L, Rivera-Munoz EM, Alonso-Nunez G |
| 4370 - 4378 |
Experimental and modeling study of the thermal conductivity of SiCp/Al composites with bimodal size distribution
Chu K, Jia CC, Liang XB, Chen H, Guo H, Yin FZ, Qu XH |
| 4379 - 4382 |
Determination of the fibre volume content in natural fibre-reinforced composites by ultimate analysis
Mahrholz T, Riedel U |
| 4383 - 4388 |
PWA/silica/PFSA composite membrane for direct methanol fuel cells
Shang FJ, Li L, Zhang YM, Li H |
| 4389 - 4393 |
Microstructural and mechanical behavior of Zr-based metallic glasses with the addition of Nb
Luo XM, Zhou Y, Lu JQ, Yu GS, Lin JG, Li W |
| 4394 - 4398 |
Comparison of Ca/P mineralization on the surfaces of poly (epsilon-caprolactone) composites filled with silane-modified nano-apatite
Deng C, Yao N, Lu X, Qu SX, Feng B, Weng J, Yang XB |
| 4399 - 4406 |
Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle
Konnerth J, Gierlinger N, Keckes J, Gindl W |
| 4407 - 4412 |
Synthesis of Fe3O4 polyhedra by hydrothermal method: using l-arginine as precipitator
Duan LF, Jia SS, Wang YJ, Chen J, Zhao LJ |
| 4413 - 4421 |
Structural characteristics and high-temperature oxidation behavior of porous Fe-40 at.%Al alloy
Shen PZ, Song M, Gao HY, He YH, Zou J, Xu NP, Huang BY, Liu CT |
| 4422 - 4428 |
Preparation and application of Cu/Cr hydrotalcite-like compounds
Jiao QZ, Liu HB, Zhao Y, Zhang Z |
| 4429 - 4442 |
Microstructural studies of self-supported (1.5-10 mu m) Pd/23 wt% Ag hydrogen separation membranes subjected to different heat treatments
Tucho WM, Venvik HJ, Walmsley JC, Stange M, Ramachandran A, Mathiesen RH, Borg A, Bredesen R, Holmestad R |
| 4443 - 4454 |
Microstructure and strengthening mechanisms of a cast Mg-1.48Gd-1.13Y-0.16Zr (at.%) alloy
Gao L, Chen RS, Han EH |
| 4455 - 4459 |
Sol-gel combustion synthesis of nanocrystalline LaMnO3 powders and photocatalystic properties
Li YY, Yao SS, Xue LH, Yan YW |
| 4460 - 4465 |
Effects of metal oxides addition on the electrochemical performance of M1Ni(3.5)Co(0.6)Mn(0.4)Al(0.5) hydrogen storage alloy
Huang HX, Huang KL, Liu SQ, Zhuang SX, Chen DY |
| 4466 - 4471 |
Synthesis, characterization, and electrochemical properties of Ni(OH)(2)/ultra-stable Y zeolite composite
Lang JW, Kong LB, Wu WJ, Luo YC, Kang L |
| 4472 - 4481 |
Influence of high temperature and high acidic conditions on geopolymeric composite material for steel pickling tanks
Chaudhary D, Liu HH |
| 4482 - 4486 |
Effect of additive composition on microstructure and strength of porous silicon carbide ceramics
Eom JH, Kim YW |
| 4487 - 4490 |
The cyclic-fatigue behaviour of an epoxy polymer modified with micron-rubber and nano-silica particles
Manjunatha CM, Taylor AC, Kinloch AJ, Sprenger S |
| 4491 - 4494 |
An hexagonal array of fourfold interconnected hexagonal nodules for modeling auxetic microporous polymers: a comparison of 2D and 3D models
Lim TC, Acharya UR |
| 4495 - 4498 |
Nanostructuring and fluorescence properties of Eu3+:LiTaO3 in Li2O-Ta2O5-SiO2-Al2O3 glass-ceramics
Tarafder A, Annapurna K, Chaliha RS, Tiwari VS, Gupta PK, Karmakar B |
| 4499 - 4502 |
Application of thermoelectric power measurements to the study of cold rolled austenitic stainless steels
Capdevila C, De Cock T, Caballero FG, San Martin D, de Andres CG |
| 4503 - 4506 |
Comment on "study on electrorheological properties of novel polymer-Ce4+ complex"
Ko SW, Choi HJ |
| 4507 - 4509 |
Preparation of gamma-alumina ceramic foams employing hydrophilated polyester polyurethane sponges
Sifontes AB, Urbina M, Fajardo F, Melo L, Mediavilla M, Carrion N, Brito JL |
| 4510 - 4510 |
Shape-selective synthesis and opto-electronic properties of Eu3+-doped gadolinium oxysulfide nanostructures (vol 44, pg 3889, 2009)
Thirumalai J, Chandramohan R, Valanarasu S, Vijayan TA, Somasundaram RM, Mahalingam T, Srikumar SR |
