| 6575 - 6577 |
Editorial: Targeting problems of composite failure
Beaumont PWR |
| 6578 - 6585 |
Very stiff fibres woven into engineering's future: a long-term perspective
Kelly A |
| 6586 - 6592 |
Virtual testing of realistic aerospace composite structures
Davies GAO, Ankersen J |
| 6593 - 6598 |
Scaling effects in notched carbon fibre/epoxy composites loaded in compression
Soutis C, Lee J |
| 6599 - 6603 |
On the propensity of laminates to delaminate
Ashbee KHG |
| 6604 - 6618 |
Vibration damping in sandwich panels
Maheri MR, Adams RD, Hugon J |
| 6619 - 6629 |
The response of carbon fibre composites to blast loading via the Europa CAFV programme
Wright A, French M |
| 6630 - 6641 |
A framework for predicting the service lifetime of composite polymeric coatings
Croll S, Hinderliter B |
| 6642 - 6650 |
Hierarchical modelling of a polymer matrix composite
Foreman JP, Behzadi S, Porter D, Curtis PT, Jones FR |
| 6651 - 6660 |
Modeling of evolving damage in high temperature polymer matrix composites subjected to thermal oxidation
Roy S, Singh S, Schoeppner GA |
| 6661 - 6667 |
Edge impact to composite laminates: experiments and simulations
Malhotra A, Guild FJ, Pavier MJ |
| 6668 - 6675 |
Impact damage in hybrid braided twill composites
Zumpano G, Fox M, Stronge WJ, Sutcliffe MPF |
| 6676 - 6681 |
Preform permeability variation with porosity of fiberglass and carbon mats
Golestanian H |
| 6682 - 6694 |
Composite bond inspection
Crane RL, Dillingham G |
| 6695 - 6703 |
Enhancement of composite scarf joint interface strength through carbon nanotube reinforcement
Kwon YW, Slaff R, Bartlett S, Greene T |
| 6704 - 6713 |
Mixed-mode crack growth in bonded composite joints under standard and impact-fatigue loading
Ashcroft IA, Casas-Rodriguez JP, Silberschmidt VV |
| 6714 - 6723 |
Influence of aging temperature, time, and environment on thermo-oxidative behavior of PMR-15: nanomechanical characterization
Putthanarat S, Tandon GP, Schoeppner GA |
| 6724 - 6733 |
Analysis of the structure and deformation of a woven composite lamina using X-ray microdiffraction
Davies RJ, Eichhorn SJ, Bennett JA, Riekel C, Young RJ |
| 6734 - 6746 |
Effects of environment on creep behavior of two oxide/oxide ceramic-matrix composites at 1200 degrees C
Ruggles-Wrenn MB, Koutsoukos P, Baek SS |
| 6747 - 6757 |
Review of the role of the interphase in the control of composite performance on micro- and nano-length scales
Jancar J |
| 6758 - 6770 |
Fibrillar polymer-polymer composites: morphology, properties and applications
Shields RJ, Bhattacharyya D, Fakirov S |
| 6771 - 6776 |
Influence of ZrO2 addition on the structure, thermal stability, and dielectric properties of ZnTiO3 ceramics
Chai YL, Chang YS, Teoh LG, Lin YJ, Hsiao YJ |
| 6777 - 6783 |
Electrical and elastic properties of Cu-W graded material produced by vibro compaction
Ilic DJ, Fiscina J, Gonzalez-Oliver CJR, Ilic N, Mucklich F |
| 6784 - 6797 |
Dielectric and piezoelectric properties of (1-x)(Na0.5K0.5)NbO3-xBaTiO(3) ceramics
Ahn CW, Choi CH, Park HY, Nahm S, Priya S |
