| 5683 - 5687 |
Effect of temperature on thermo-mechanical properties of Macro-Defect-Free cement-polymer composite
Alfani R, Colombet P, D'Amore A, Rizzo N, Nicolais L |
| 5689 - 5700 |
Infrared spectroscopic evaluation of the photodegradation of paint - Part I - The UV degradation of acrylic films pigmented with titanium dioxide
Christensen PA, Dilks A, Egerton TA, Temperley J |
| 5701 - 5705 |
Fabrication of transparent continuous oxynitride glass fiber-reinforced glass matrix composite
Iba H, Naganuma T, Matsumura K, Kagawa Y |
| 5707 - 5720 |
Simulation of prismatic cracking of cooling basalt lava flows by the drying of sol-gels
Hull D, Caddock BD |
| 5721 - 5732 |
Sintering mechanisms in strontium doped lanthanum chromite
Simner S, Hardy J, Stevenson J, Armstrong T |
| 5733 - 5742 |
A technique for the fabrication of fully dense Ca-rich plagioclase (An(70)-An(100)) samples suitable for studying the plastic rheology of bytownite (An(80))
Wendt AS, Olgaard DL, Mainprice D |
| 5743 - 5747 |
In-situ high temperature X-ray diffraction study of Co/SiC interface reactions
Fujimura T, Tanaka SI |
| 5749 - 5756 |
Dynamic strains in architectural laminated glass subjected to low velocity impacts from small projectiles
Behr RA, Kremer PA, Dharani LR, Ji FS, Kaiser ND |
| 5757 - 5769 |
The displacive compensation of porosity (DCP) method for fabricating dense, shaped, high-ceramic-bearing bodies at modest temperatures
Kumar P, Sandhage KH |
| 5771 - 5776 |
Effects of particle size on thermal durability and microporous characteristics for sintered bodies of alumina-pillared fluorine micas
Yamaguchi T, Sakai Y, Kitajima K |
| 5777 - 5782 |
Comprehensive study of the degradation of an intumescent EVA-based material during combustion
Le Bras M, Bourbigot S, Revel B |
| 5783 - 5788 |
Preparation of nanosize SnO2 particles in an aerosol reactor by pyrolysis of tetra-n-butyl tin
Kim KY, Park SB |
| 5789 - 5802 |
The influence of metals and carbides during laser surface modification of low alloy steel
McCay MH, Dahotre NB, Hopkins JA, McCay TD, Riley MA |
| 5803 - 5809 |
Sintering and crystallization of (SrO center dot SiO2)-(SrO center dot Al2O3 center dot 2SiO(2)) glass-ceramics
Sung YM, Park JS |
| 5811 - 5819 |
Reactions between La1-xCaxMnO3 and CaO-stabilized ZrO2 - Part II - Diffusion couples
Faaland S, Einarsrud MA, Wiik K, Grande T, Hoier R |
| 5821 - 5825 |
Secondary phases in natural magnesite sintered with addition of titania, ilmenite and zirconia
Chaudhuri M, Banerjee G, Kumar A, Sarkar SL |
| 5827 - 5832 |
A modification of tape casting for aligning the whiskers
Park DS, Kim CW |
| 5833 - 5838 |
Effect of rare-earth (Eu, Yb and Ag) substitutions on superconducting properties of the Bi1.7Pb0.3Sr2Ca2-R-x(x)(R = Eu, Yb, and Ag)Cu3Oy system
Khan MN, Khizar M |
| 5839 - 5845 |
Brazing Al2O3 to sintered Fe-Ni-Co alloys
Do Nascimento RM, Martinelli AE, Buschinelli AJDA, Klein AN |
| 5847 - 5851 |
Effect of applied potential on the nature of surface film and SCC of a high Mn stainless steel in 1 M HCl
Devasenapathi A, Asawa M |
| 5853 - 5860 |
The mechanical behavior of optical fiber sensor embedded within the composite laminate
Jang TS, Lee JJ, Lee DC, Huh JS |
| 5861 - 5869 |
Analytical modelling of mechanical properties for rubber-toughened polymers
Wang QZ, Lee DJ |
| 5871 - 5878 |
Viscoplastic modeling of ABS material under high-strain-rate uniaxial elongational deformation
Wang S, Makinouchi A, Okamoto M, Kotaka T, Nakagawa T |
| 5879 - 5884 |
Densification model for powder compacts
Lam DCC |
| 5885 - 5891 |
Tetragonal to monoclinic transformation in Y-TZP joined with metallic materials
Yoshikawa N, Kikuchi A, Taniguchi S, Takahashi T |
| 5893 - 5898 |
Hydrothermal precipitation of hydroxyapatite on anodic titanium oxide films containing Ca and P
Ishizawa H, Ogino M |
| 5899 - 5906 |
Interfacial reactions between Ti-6Al-4V alloy and zirconia mold during casting
Lin KF, Lin CC |
| 5907 - 5910 |
Characterization of thermal behavior of mixed bismaleimides for composites
Krishnan K, Vijayan TM, Ninan KN |
| 5911 - 5918 |
Control of the structure and properties of barium sulphate-filled blends of polypropylene and ethylene propylene copolymers
Hammer CO, Maurer FHJ, Molnar S, Pukanszky B |
| 5919 - 5922 |
Two limits of melting temperatures of nanocrystals
Jiang Q, Zhang Z, Hsu DT, Tong HY, Iskandar M |
| 5923 - 5926 |
Wettability and surface free energy of zirconia ceramics and their constituents
Gonzalez-Martin ML, Labajos-Broncano L, Janczuk B, Bruque JM |
| 5927 - 5936 |
The effect of time and temperature on flexural creep and fatigue strength of a silica particle filled epoxy resin
McMurray MK, Amagi S |
| 5937 - 5941 |
Nucleation kinetics of a Li2O center dot 2SiO(2) glass based on a liquid model
Ota R, Mishima N, Wakasugi T, Fukunaga J |
