| 321 - 329 |
Numerical Simulation of Dust Cake Build-up in Rigid Ceramic Filters
Guan CT, Seville JPK |
| 330 - 336 |
Effects of Pressure on the Minimum Fluidization Velocity and Bubble Properties in a Gas-Solid Fluidized Bed
Kang SH, Kang Y, Han KH, Jin GT |
| 337 - 348 |
Arsenic In Water: Concerns And Treatment Technologies
Tien VN, Chaudhary DS, Ngo HH, Vigneswaran S |
| 349 - 353 |
Removal of Natural Organic Matter (NOM) by Ozone Oxidation and Biological Filtration Using a Rope-Type Biofilter
Sim SJ, Kang YS, Kim WS |
| 354 - 360 |
Pre-denitrification and Post-nitrification in an Integrated Anaerobic/Aerobic Filter System for Advanced Treatment of Municipal Wastewater
Chang D, Seo SC, Hong KH |
| 361 - 367 |
Vitrification of Fly and Bottom Ashes from Municipal Solid Waste Incinerator using Brown's Gas
Hyun JS, Park JW, Maken S, Park JJ |
| 368 - 378 |
Influence of Processing Variables on the Rheological Properties of Lubricating Greases Manufactured in a Stirred Tank
Garcia-Morales JA, Franco JM, Valencia C, Sanchez MC, Gallegos C |
| 379 - 383 |
Formation of PZT from Multilayer-Structured PbTiO3 and PbZrO3 Thin Films Prepared by Plasma-Enhanced Chemical Vapor Deposition
Lee WG, Woo SI |
| 384 - 388 |
Purification of Native and Modified Enzymes Using a Reactive Aqueous Two-Phase System
Kim Y, Park K, Lee H, Jang S, Song HC, Shin HC, Park JJ, Park J, Maken S |
| 389 - 394 |
Solubility Behavior of Copolymers of Tetrahydropyranyl Methacrylate and 1H,1H,2H,2H-Perfluorooctyl Methacrylate in Carbon Dioxide: Effect of Deprotection of THP Groups
Heo JY, Kim JT, Jeong YS, Gal YS, Lim KT |
| 395 - 401 |
Effect of Urethane Dimethacrylate Diluent on the Mechanical Properties of Hybrid-filled Polymeric Dental Restorative Composites
Kim O, Han S |
| 402 - 408 |
Electrical and Physical Characterization of Fe3O4-impregnated Elastomeric Composites
Choi KC, Lee EK, Choi SY |
| 409 - 415 |
Synthesis of PU-g-AAc Ion Exchangers by UV Radiation-induced Graft Copolymerization and Their Adsorption of Ammonia
Hwang TS, Park JW, Kim SM, Cho SY |
| 416 - 427 |
Gas Flow Direction Under Heterogeneous Geometry Composed of a Pipe and a Cavity of Two Square-Flat Plates in Gas Assisted Injection Molding
Lim KH |
| 428 - 434 |
UV Protection Characteristics and Fabrication of Modified TiO2 Nanoparticles
Choi JW, Kim JY, Lee W, Lee WH, Jang HD, Lee SB |
| 435 - 441 |
Formation and Characterization of TiO2-coated SiO2 Nanoparticles by W/O Microemulsion Method
Kim SH, Kim KD, Song KY, Kim HT |
| 442 - 444 |
A Study on the Stability of MgO in a LiCl-Li2O Molten Salt System
Hur JM, Kim IS, Lee WK, Cho SH, Seo CS, Park SW |
| 445 - 453 |
Benzene Hydroxylation to Phenol Catalyzed by Transition Metals Supported on MCM-41 and Activated Carbon
Choi JS, Kim TH, Saidutta MB, Sung JS, Kim KI, Jasra RV, Song SD, Rhee YW |
| 454 - 459 |
Hydroisomerization of n-Heptane over Modified USY-Supported H3PW12O40 Catalysts: Effect of Hydrothermal Treatment for USY
Wang J, Jiang DM, Baeg JO, Lee CW |
| 460 - 467 |
Effect of Temperature on the Gas Yield from Flash Pyrolysis of Bituminous Coals
Song BH, Watkinson AP |
| 468 - 472 |
Characteristics of Titanium Sponge for the Storage of Hydrogen Isotopes: I. Activation Process
Paek S, Ahn DH, Kim KR, Lee M, Chung H |
| 473 - 477 |
Liquefaction of Lignocellulosic Biomass with Dioxane/Polar Solvent Mixtures in the Presence of an Acid Catalyst
Mun SP, Hassan EBM |
| 478 - 483 |
Degradation Analysis of Human Hemoglobin by High-Performance Liquid Chromatography
Row KH, Lee SK, Polyakova Y |
| 484 - 491 |
Peak Separation Method for Estimating Apparent Kinetic Parameters of Dehydrochlorination Reactions of PVC: Independent Reactions
Kim S, Hwang IH, Kim YK |
| 492 - 498 |
Mass Transfer Effect on the Photocatalytic Activity of UV/TiO2 Packed-Bed System
Lee S, Lee K |
