1 - 8 |
Separation and compression characteristics of hydrogen by use of proton exchange membrane Onda K, Ichihara K, Nagahama M, Minamoto Y, Araki T |
9 - 16 |
Hydrogen production by methanol-water solution electrolysis Take T, Tsurutani K, Umeda M |
17 - 23 |
Study of slurry spin coating technique parameters for the fabrication of anode-supported YSZ Films for SOFCs Wang JM, Lu Z, Chen KF, Huang XQ, Ai N, Hu JY, Zhang YH, Su WH |
24 - 32 |
Sintering behavior of porous alpha-lithium aluminate matrices in molten carbonate fuel cells at high temperature Zhou L, Lin HX, Yi BL |
33 - 41 |
Fabrication and impedance studies of DMFC anode incorporated with CNT-supported high-metal-content electrocatalyst Jeng KT, Chien CC, Hsu NY, Huang WM, Chiou SD, Lin SH |
42 - 48 |
Deactivation of ceria-based SOFC anodes in methanol Kim T, Ahn K, Vohs JM, Gorte RJ |
49 - 55 |
Preparation of three-dimensional composite of poly(N-acetylaniline) nanorods/platinum nanoclusters and electrocatalytic oxidation of methanol Jiang CM, Lin XQ |
56 - 64 |
Fabrication and characterization of a co-fired La0.6Sr0.4Co0.2Fe0.8O3-delta cathode-supported Ce0.9Gd0.1O1.95 thin-film for IT-SOFCs Liu Y, Hashimoto S, Nishino H, Takei K, Mori M |
65 - 72 |
Crosslinked sulfonated poly(ether ether ketone) proton exchange membranes for direct methanol fuel cell applications Zhong SL, Cui XJ, Cai HL, Fu TZ, Zhao C, Na H |
73 - 79 |
Thermodynamic analysis of carbon formation boundary and reforming performance for steam reforming of dimethyl ether Faungnawakij K, Kikuchi R, Eguchi K |
80 - 85 |
Novel multilayer Nafion/SPI/Nafion composite membrane for PEMFCs Wang L, Yi BL, Zhang HM, Liu YH, Xing DM, Shao ZG, Cai YH |
86 - 89 |
A high-performance ammonia-fueled SOFC based on a YSZ thin-film electrolyte Ma QL, Ma JJ, Zhou S, Yan RQ, Gao JF, Meng GY |
90 - 93 |
An ultrasound enhanced direct methanol fuel cell Han JH, Ge JB, Liu HT |
94 - 99 |
Electrochemical reaction of lithium alanate dissolved in diethyl ether and tetrahydrofuran Senoh H, Kiyobayashi T, Kuriyama N, Tatsumi K, Yasuda K |
100 - 104 |
Influences of fuel crossover on cathode performance in a micro borohydride fuel cell Liu BH, Suda S |
105 - 110 |
High activity Pt/C catalyst for methanol and adsorbed CO electro-oxidation Teng ZH, Wang G, Wu B, Gao Y |
111 - 114 |
Carbon supported Pt-Co (3 : 1) alloy as improved cathode electrocatalyst for direct ethanol fuel cells Lopes T, Antolini E, Colmati F, Gonzalez ER |
115 - 125 |
Effects of cell-to-cell fuel mal-distribution on fuel cell performance and a means to reduce mal-distribution using MEMS micro-valves Hensel JP, Gemmen RS, Thornton JD, Vipperman JS, Clark WW, Bucci BA |
126 - 133 |
The stability of Pt/C catalyst in H3PO4/PBI PEMFC during high temperature life test Zhai YF, Zhang HM, Xing DM, Shao ZG |
134 - 140 |
An approach to measuring spatially resolved water crossover coefficient in a polymer electrolyte fuel cell Lu GQ, Liu FQ, Wang CY |
141 - 153 |
Gas diffusion layer durability under steady-state and freezing conditions Lee C, Merida W |
154 - 165 |
Electroosmotic effect on flows in a serpentine microchannel with varying zeta potential Saha AA, Mitra SK, Li XG |
166 - 173 |
Real time measurements of methanol crossover in a DMFC Han JH, Liu HT |
174 - 181 |
A complete two-phase model of a porous cathode of a PEM fuel cell Hwang JJ |
182 - 188 |
Low temperature solid oxide fuel cells with pulsed laser deposited bi-layer electrolyte Yang DF, Zhang XG, Nikumb S, Deces-Petit C, Hui R, Maric R, Ghosh D |
189 - 195 |
Modeling water transport in liquid feed direct methanol fuel cells Liu WP, Wang CY |
196 - 202 |
Demonstration of a residence time distribution method for proton exchange membrane fuel cell evaluation St-Pierre J, Wong A, Diep J, Kiel D |
203 - 209 |
Preparation and performance of a Cu-CeO2-ScSZ composite anode for SOFCs running on ethanol fuel Ye XF, Huang B, Wang SR, Wang ZR, Xiong L, Wen TL |
210 - 221 |
A model for a vertical planar air breathing PEM fuel cell Rajani BPM, Kolar AK |
222 - 237 |
Numerical study of water management in the air flow channel of a PEM fuel cell cathode Quan P, Lai MC |
238 - 251 |
Thermal stress analysis of a planar SOFC stack Lin CK, Chen TT, Chyou YP, Chiang LK |
252 - 259 |
A high fuel utilizing solid oxide fuel cell cycle with regard to the formation of nickel oxide and power density Nehter P |
260 - 271 |
Solid oxide fuel cell micro combined heat and power system operating strategy: Options for provision of residential space and water heating Hawkes AD, Aguiar P, Croxford B, Leach MA, Adjiman CS, Brandon NP |
272 - 277 |
The influence of hydrogen sultide on proton exchange membrane fuel cell anodes Shi WY, Yi BL, Hou M, Jing FN, Yu HM, Ming PW |
278 - 283 |
Properties of Fe-Cr based alloys as interconnects in a solid oxide fuel cell Han MF, Peng SP, Wang ZL, Yang ZB, Chen X |
284 - 286 |
A novel method for the preparation of a PEMFC water management layer Shi JS, Tian JH, Zhang C, Shan ZQ |
287 - 292 |
Design and testing of a passive planar three-cell DMFC Martin JJ, Qian WM, Wang HJ, Neburchilov V, Zhang JJ, Wilkinson DP, Chang ZR |
293 - 299 |
High performance composite interconnect La0.7Ca0.3CrO3/20 mol% ReO1.5 doped CeO2 (Re = Sm, Gd, Y) for solid oxide fuel cells Zhou XL, Deng FJ, Zhu MX, Meng GY, Liu XQ |
300 - 305 |
Performance and life-time behaviour of NiCu-CGO anodes for the direct electro-oxidation of methane in IT-SOFCs Sin A, Kopnin E, Dubitsky Y, Zaopo A, Arico AS, La Rosa D, Gullo LR, Antonucci V |
306 - 314 |
A semi-empirical voltage degradation model for a low-pressure proton exchange membrane fuel cell stack under bus city driving cycles Lu LG, Ouyang MG, Huang HY, Pei PC, Yang FY |
315 - 321 |
Dynamic behavior of PEM fuel cell and microturbine power plants El-Sharkh MY, Sisworahardjo NS, Uzunoglu M, Onar O, Alam MS |
322 - 327 |
Power characteristics and fluid transfer in 40 W direct methanol fuel cell stack Liu Y, Xie XF, Shang YM, Li R, Qi L, Guo JW, Mathur VK |
328 - 335 |
Toward autonomous control of microreactor system for steam reforming of methanol Shin WC, Besser RS |
336 - 343 |
Simulation of a hydrogen production and purification system for a PEM fuel-cell using bioethanol as raw material Giunta P, Mosquera C, Amadeo N, Laborde M |
344 - 350 |
Nickel-catalyzed autothermal reforming of jet fuel surrogates: n-dodecane, tetralin, and their mixture Gould BD, Tadd AR, Schwank JW |
351 - 364 |
A review on the separators of liquid electrolyte Li-ion batteries Zhang SS |
365 - 371 |
Diffusion-limited model for a lithium/air battery with an organic electrolyte Sandhu SS, Fellner JP, Brutchen GW |
372 - 378 |
Electrochemical studies of low-temperature processed nano-crystalline LiMn2O4 thin film cathode at 55 degrees C Tang SB, Lai MO, Lu L |
379 - 385 |
Electrochemical and physical properties of poly(acrylonitrile)/poly(vinyl acetate)-based gel electrolytes for lithium ion batteries Amaral FA, Dalmolin C, Canobre SC, Bocchi N, Rocha RC, Biaggio SR |
386 - 389 |
Electrochemical performance of nanostructured amorphous Co3Sn2 intermetallic compound prepared by a solvothermal route Xie J, Zhao XB, Cao GS, Tu JP |
390 - 396 |
High rate performance of a lithium polymer battery using a novel ionic liquid polymer composite Sato T, Marukane S, Narutomi T, Akao T |
397 - 414 |
Thermal activated (thermal) battery technology - Part II. Molten salt electrolytes Masset P, Guidotti RA |
415 - 424 |
Impedance analysis on electric double layer capacitor with transmission line model Itagaki M, Suzuki S, Shitanda I, Watanabe K, Nakazawa H |
425 - 429 |
Nickel hydroxide/activated carbon composite electrodes for electrochemical capacitors Huang QH, Wang XY, Li J, Dai CL, Gamboa S, Sebastian PJ |